ACM2160AB-PACM2160AB0 Amana Microwave - Overview

Diagrams for ACM2160AB-PACM2160AB0

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Black Sleeve Diode – Part Number: WPR9800486
$39.55
Special Order
Black Sleeve Diode
Part #WPR9800486
Door Interlock Switch Kit – Part Number: 4392027
$146.47
Special Order
Door Interlock Switch Kit
Part #4392027
This kit contains 2 switches - 15 Amp - 125/250 Volt with 3/16" terminals.
Microwave Light Bulb – Part Number: WP8183592
$46.15
Special Order
Fastener Screw – Part Number: 8169475
$9.84
Special Order
Fastener Screw
Part #8169475
Sold individually.
Microwave Spring – Part Number: WP4158178
No Longer Available
Microwave Spring
Part #WP4158178
Door open button spring.
SCREW – Part Number: W11380570
$28.95
Special Order
SCREW
Part #W11380570
Sold individually. For white and almond models.
Microwave Turntable Motor – Part Number: WPW10159107
$128.62
Special Order
Microwave Turntable Motor
★★★★★
★★★★★
(1)
Part #WPW10159107
This motor rotates the glass turntable in the microwave.
Microwave Wave Guide Rivet – Part Number: WP4359508
$14.95
Special Order
Microwave Wave Guide Rivet
Part #WP4359508
This rivet is used for the stirrer cover/wave guide. They are sold individually.
Microwave Magnetron – Part Number: W10859575
$447.07
Special Order
Microwave Magnetron
Part #W10859575
This part is used to generate microwave energy/heat.
Turntable Roller Guide – Part Number: WP8205178
No Longer Available
Turntable Roller Guide
Part #WP8205178
This roller is located underneath the glass turntable. With the help of the motor, this roller helps to rotate the glass tray. This part takes the place of the coupling.
Capacitor – Part Number: WP59001168
$197.24
In Stock
Capacitor
Part #WP59001168
Latch Bracket – Part Number: WP8184269
$91.61
Special Order
Latch Bracket
Part #WP8184269

Common Symptoms of the ACM2160AB-PACM2160AB0

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sparks and loud hum from oven
113 of 171 people found this instruction helpful.
  • Guy from Bellingham, MA
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
1. I went to the internet to find the service manual for the Maytag microwave.
2. I opened up the oven and started measuring the resistance of the diode, capacitor, transformer, and magnetron between terminals and then to ground. The transformer and magnetron were well within the resistance limits. The diode was shorted in both direc tions(+-). The capacitor was fully open in both directions -- high resistance.
3. I ordered the 2 parts, installed them, and ran the oven. Worked perfect first time.
4. Reinstalled oven and worked ever since (1 week so far).
5. The secret was that the transformer had a load hum. I figured the transformer was OK. The magnetron had no short between filaments and ground to filaments. The only two left were the diode and capacitor. The first two are about $200 -- almost the value of a new microwave. The $70 repair was well worth it. If the first two were still bad, then tempted to buy a new oven.
Was this helpful?
Thank you for voting!
Microwave worked intermittently depending on how door was closed
67 of 85 people found this instruction helpful.
  • Robert from Bainbridge Island, WA
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers
Remove top grille (2 screws), undo control panel (1 screw). Tilt down control panel, switches are on the left. There are actually three switches that are involved with the door, two horizontally mounted, one vertically mounted. This would be an EASY REPAIR, but it took me a while to figure out which of the three switches was bad, and a lso took a while to figure out that there is a plastic rod that inserts through the hole in the switch body. Once i figured this out went like a breeze. Lower horizontal switch was the bad one, but since the kit came with two switches i went ahead and replaced the upper horizontal one as well. IT appears that the horizontal switches are probably more likely to fail than the vertical switch based on the position of the switch and force angles. Works great now!
Was this helpful?
Thank you for voting!
loud buzzing noise
56 of 100 people found this instruction helpful.
  • Sandra from coto de caza, CA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
The repair went well...I am so glad that I read this info before buying a new microwave....it saved me lots of money. I did have a repair man come and look at it and he told me to buy a new one but it cost alot of money when it wasn't necessary. I did the repair and I was very proud of myself.
Three men watched a woman fix this and it was no problem...they were impressed also....
Was this helpful?
Thank you for voting!