This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
This surface element is made for under glass set-ups and supplies the heat to a cooking area on top of the range. It has an outside diameter of approximately 7 inches (1500 watts), and is a genuine OE...
Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper, dirt, stickers and more.
Opened the oven door, removed three screws holding trim to door, and removed trim piece.Installed new trim using the 3 screws. Looks good as new. Part was easy to find on Parts Direct using their illustrations of the Maytag stove.
1. Flip "OFF" circuit breaker. 2. Pull out range unit from wall. 3. Unplug range unit. 4. On the back of the range unit, remove 4 screws holding lower rear cover using a phillips head screwdriver. 5. Remove lower rear cover. 6. Unplug temperature sensor connector (1 wire connector located upper right section behind oven). 7. From inside oven (upper left, back corner), remove 2 screws holding temperature sensor unit using a Phillips head screwdriver. 8. Remove old temperature sensor unit. 9. Insert new temperature sensor unit (wire connector end first) through opening and secure reusing old screws. 10. Re-connect temperature sensor connector. 11. Re-attach and secure lower rear cover reusing 4 old screws. 12. Plug in range unit. 13. Move range unit back to desired location. 14. Flip "ON" circuit breaker.