A2H243GA0 (AMBAHCI) LG Air Conditioner - Overview
Sections of the A2H243GA0
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
BEARING
PartSelect #: PS12075835
Manufacturer #: 4280A20004M
Unusual noise from an indoor blower can be caused by a worn blower wheel bearing. This replacement bearing provides a smooth support point that allows the wheel to rotate while moving air across the r...
$25.95
In Stock
Order within the next 1 hr and 5 mins and your part ships today!
THERMISTOR ASSEMBLY,NTC
PartSelect #: PS3622965
Manufacturer #: EBG61107008
$57.15
In Stock
Order within the next 1 hr and 5 mins and your part ships today!
Remote Control
PartSelect #: PS11729022
Manufacturer #: AKB74375404
$84.65
In Stock
Order within the next 1 hr and 5 mins and your part ships today!
PCB Assembly,Main
PartSelect #: PS3529780
Manufacturer #: 6871A20500B
$85.69
In Stock
Order within the next 1 hr and 5 mins and your part ships today!
Case Assembly,Control(Outdoor)
PartSelect #: PS3525132
Manufacturer #: 4995A00002G
$631.10
Special Order
Common Symptoms of the A2H243GA0
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Plastic fan broke when I attempted to clean it
The inside air blower for the LG mini-split collects lint and clogs up. Removing the broken blade requires removing the outer plastic housings, then screws at each end of the blower housing. Some screws at the control end require removing the control units first. There is a set screw that connects the fan to the motor shaft at the control end. There is a missing blade in the fan to allow access. This screw was lock-tighted in place and required significant force to loosen. The new fan took some wiggling to get it onto the shaft. Then replace the screws at each end of the fan housing, followed by the control unit screws, and the plastic outer covers. It was not an easy job. I used more care with a small bottle brush to clean the second fan unit and avoided breaking that fan.
Parts Used:
-
Donna from Austin, TX
-
Difficulty Level:Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Capacitor went out
-
Al from CROSS PLAINS, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
2 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!