987799610 Craftsman Chipper Shredder - Overview

Diagrams for 987799610

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Air Filter Cleaner Cartridge – Part Number: 590601
$32.95
Special Order
Air Filter Cleaner Cartridge
Part #590601
A clogged air filter can limit airflow and may cause poor running, loss of power, or hard starting. This pleated cartridge protects compatible mower, generator, and pressure-washer engines from airborne dirt. Verify fit using the engine model, type, and code numbers found on the engine housing. Remove loose debris from the filter compartment without letting it fall into the intake. Replace the cartridge rather than washing it, and check that the cover and sealing surfaces are secure before returning the equipment to use.
Oil Pump Assembly – Part Number: 29914
No Longer Available
Oil Pump Assembly
Part #29914
Gasket – Part Number: 49-084
No Longer Available
Gasket
Part #49-084
Nut – Part Number: 632682
No Longer Available
Nut
Part #632682
Compression Spring – Part Number: 36482
No Longer Available
Compression Spring
Part #36482
Blower Housing – Part Number: 36420A
No Longer Available
Blower Housing
Part #36420A
Screw, 2 Pk. – Part Number: STD523715
No Longer Available
Screw, 2 Pk.
Part #STD523715
Washer – Part Number: 590600
No Longer Available
Washer
Part #590600
Gasket – Part Number: 49-402
No Longer Available
Gasket
Part #49-402
Washer – Part Number: 28277
No Longer Available
Washer
Part #28277
Module – Part Number: 440-505
No Longer Available
Module
Part #440-505
Hose Clamp – Part Number: 120-251
No Longer Available
Hose Clamp
Part #120-251
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Leaking gasoline from carburetor bowl. No air filter
1 of 2 people found this instruction helpful.
  • Richard from Geneva, IL
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Socket set, Wrench set
First took photos of the current hookup for referencing. Cleaned the area. Removed the gas tank for easy access to the fasteners and hookups. Everything came undone fairly easy. Cleaned the area some more. Installed all new parts and the form and fit was perfect. Quite the upgrade. Put it all back together. Primed the carb. After abo ut 10 pulls the edger started right up. No gasoline leaks to be found. Shut down. Started on the first pull. I’m good to go.
Was this helpful?
Thank you for voting!