960420217 Craftsman Lawn Tractor - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Retainer Spring – Part Number: 403187
No Longer Available
Retainer Spring
Part #403187
Spark arrestor – Part Number: 137180
No Longer Available
Spark arrestor
Part #137180
Plug Dash – Part Number: 532441126
No Longer Available
Plug Dash
Part #532441126
Inner tube – Part Number: 59904
No Longer Available
Inner tube
Part #59904
Mower Deck Weldment – Part Number: 199606
No Longer Available
Mower Deck Weldment
Part #199606
Brake Linkage – Part Number: 199918
No Longer Available
Brake Linkage
Part #199918
Idler V-Groo – Part Number: 194326
No Longer Available
Idler V-Groo
Part #194326
Bolt 5/16-18 – Part Number: 74520520
No Longer Available
Bolt 5/16-18
Part #74520520
Terminal Cover – Part Number: 435395
No Longer Available
Terminal Cover
Part #435395
Cap – Part Number: 414852X428
No Longer Available
Cap
Part #414852X428
This cap is a genuine component that is supplied by the original manufacturer for use for Craftsman lawn tractors. This part covers the bolt that connects to the steering wheel to the steering shaft. No tools needed to replace this part. This part is made of hard plastic and sold individually.
Bolt – Part Number: STD533106
No Longer Available
Bolt
Part #STD533106
This is a genuine manufacturer-sourced replacement part which is specially produced for use with Craftsman lawn and garden equipment. It is a standard hardware which has multiple applications, please make sure to check appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this durable metal bolt is sold individually.
Fuse, 20-amp – Part Number: STD391020
No Longer Available
Fuse, 20-amp
Part #STD391020

Common Symptoms of the 960420217

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Wheel bushings were bad
29 of 48 people found this instruction helpful.
  • Anthony from OLIVEHILL, TN
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Removed old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side.
Was this helpful?
Thank you for voting!
Mower belt fell off was cut by the drive pulley.
2 of 4 people found this instruction helpful.
  • Steve from DAMASCUS, OR
  • Easy
  • Less than 15 mins
Got the proper length and pulley size belt via serial number. Checked the length prior to ordering to assure the length would be correct.
Took mower onto a flat surface where I could get on both sides of the deck. And then placed the belt on the back pulleys first . Then I routed it through the idler pulleys to the power pulley whe re I turned the pulley with putting finger pressure against the belt as I turned the pulley. And it went on with no problem . It is that simple just be sure to turn the pulley and apply the belt in the same direction at the same time.
Was this helpful?
Thank you for voting!
Take the wheel off. Place the key in the slot. Put the wheel back on.
7 of 19 people found this instruction helpful.
  • Gary from PILESGROVE, NJ
  • Very Easy
  • Less than 15 mins
Just described it.
Was this helpful?
Thank you for voting!