92506 Briggs and Stratton Engine - Overview

Models starting with 92506

Click on the best match to narrow your results.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Tube-Breather – Part Number: 230802
$16.95
Special Order
Tube-Breather
Part #230802
Spring-condensor – Part Number: 260374
$13.95
Special Order
Spring-condensor
Part #260374
Link-air Vane – Part Number: 260878
$9.95
Special Order
Link-air Vane
Part #260878
Gasket-choke Cover – Part Number: 270571
$12.95
Special Order
Gasket-choke Cover
Part #270571
Spacer-air Cleaner – Part Number: 280374
$12.95
Special Order
Spacer-air Cleaner
Part #280374
Seal-Oil – Part Number: 391485
$17.95
Special Order
Seal-Oil
Part #391485
Carburetor – Part Number: 396893
$93.95
Special Order
Carburetor
Part #396893
Spring-vert Rew Str – Part Number: 390066
$36.95
Special Order
Spring-vert Rew Str
Part #390066
Spring-Vert Rew Str
Screw – Part Number: 691666
$6.95
Special Order
Screw
Part #691666
Clip-vertical Str – Part Number: 299961
$11.95
Special Order
Clip-vertical Str
Part #299961
Screw – Part Number: 691664
$7.95
Special Order
Screw
Part #691664
Tube-pick Up – Part Number: 496046S
$15.95
Special Order
Tube-pick Up
Part #496046S
This item is priced as an individual replacement part. The pick-up tube is made out of plastic and metal. A set of pliers may be helpful when replacing this item. It will require replacing if it becomes broken. This is an OEM Briggs & Stratton part directly sourced from the manufacturer for use in engines.

Exact Part matches for your search term

CRANKCASE, FOR EVAPORATOR SHS3 – Part Number: 92506
No Longer Available
CRANKCASE, FOR EVAPORATOR SHS3
This part number matches the current model number 92506
Part #92506

Common Symptoms of models starting with 92506

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Could not keep an aftermarket muffler on the engine.
15 of 20 people found this instruction helpful.
  • Richard from KERNERSVILLE, NC
  • Really Easy
  • 15 - 30 mins
  • Wrench set
Once I determined what OEM muffler I needed, installation was relatively easy. I have a 1982 4hp Briggs on my Snapper tiller. There was a 90* galvanized elbow coming out of the exhaust port, with a bezel nut to lock it down. Do not remove the elbow, even though it appears that you should. If you install the muffler without the elbow the m uffler will parallel the the vacuum for the carburetor and can melt the rubber couplers. Use the elbow to direct the heat away from the carburetor. Use a pipe wrench to lock down the bezel nut because the weight of the muffler, especially under vibration, can work loose and fall down on the tine belt cover and melt it. The bezel nut that comes with the muffler should also be used to lock down the muffler to the threaded intake bracket that comes with the muffler, not to replace the bezel nut for the elbow.
Was this helpful?
Thank you for voting!
Push mower leaked under neath.
1 person found this instruction helpful.
  • Raymond from Coalport, PA
  • Easy
  • 15 - 30 mins
  • Pliers, Socket set
Pulled the old seal out, replaced it with seal #391483S and so far looking good !
Was this helpful?
Thank you for voting!