This piston kit is for air compressors.
The piston kit contains parts for rebuilding the piston and related parts. The kit may include multiple parts; refer to your parts diagram for a complete lis...
This intake filter is a genuine Craftsman part for air compressors. This part keeps the air clean by filtering out debris and dust out of the air compressor. It is recommended to unplug the air compr...
This isolator kit is an original part from Craftsman for air compressors. This part connects underneath to the air compressor and helps with the vibration noise. It is recommended to review your model...
This is an original replacement part manufactured for use with Craftsman air compressors. The special filter is used to prevent dust or debris from entering the air intake on the cylinder head of the ...
Could not find external leak, so assumed problem was in the cylinder head. I removed the big, black plastic shroud, and disconnected the line with the cooling fins leading from the cylinder head to the tank. I then unbolted the 4 Allen bolts holding the cylinder head to the cylinder body. I discovered the gasket that sits on top of the valve plate was shredded in the center piece that separates the intake port from the exhaust port. I put in new reed valves (PS10044654) and replaced the blue gasket between the cylinder and the lower valve plate and the metal gasket between the valve plates and the blue gasket on top of the upper valve plate. The gaskets are part of gasket kit PS10044723. I had to scrape the old blue gaskets off, which was the most time consuming part of the repair. I used valve grease to hold the reed valves in place during re-assembly. I did not use the gasket at the base of the cylinder or the gasket that is used for the crank case cover since neither was removed. Reinstalled the Allen bolts, the line to the tank from the cylinder head and the plastic shroud. Compressor works fine now.
