919167461 Craftsman Compressor - Overview
Sections of the 919167461
[Viewing 2 of 2]
Manuals & Care Guides for 919167461
Click to downloadKeep searches simple, eg. "belt" or "pump".
SCREW .250-20X.500 H
PartSelect #: PS12521312
Manufacturer #: D21172
This is a genuine replacement part sourced from the original manufacturer for use with air compressors and generators. The flanged hex head bolt is used with several different types of equipment and t...
$5.95
Special Order
SCREW #10-9X.500 THD
PartSelect #: PS12523890
Manufacturer #: SSF-3156
This is a genuine manufacturer-sourced replacement screw which is specially produced for use with portable generators and air compressors. Make sure to refer to the appropriate diagrams of your model ...
$5.95
Special Order
Valve
PartSelect #: PS17000937
Manufacturer #: D20114
This safety valve is a genuine replacement part manufactured for use with air compressors. If the compressor's pressure switch malfunctions, and does not turn the motor off when the amount of pressure...
$13.48
Special Order
Air Compressor Connecting Rod Cap
PartSelect #: PS10042502
Manufacturer #: ACG-29
This is a genuine DeVilbiss replacement part sourced directly from the manufacturer. The connecting cap is found in compressors from DeVilbiss, Porter Cable, and Black & Decker. This part is made of...
No Longer Available
Questions And Answers for 919167461
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 919167461
[Viewing 2 of 2]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The air was bypassing the compressor gaskets and cylinder wall was worn out
1 remove cover
2 unhook air line to tank
3 remove head bolts
4 remove intake from head
5 remove flywheel bolt to free up pump piston
6 remove screw on top of piston to change out gasket
7 remove the cylinder sleeve install piston from the top
8 reassemble piston rod end and the flywheel
9 on the head cover are two gaskets one on top and one on the bottom head
10 insert intake piece and bolt the head cover back in place
11 reinstall the air line and unit cover and secure with three cover screws
2 unhook air line to tank
3 remove head bolts
4 remove intake from head
5 remove flywheel bolt to free up pump piston
6 remove screw on top of piston to change out gasket
7 remove the cylinder sleeve install piston from the top
8 reassemble piston rod end and the flywheel
9 on the head cover are two gaskets one on top and one on the bottom head
10 insert intake piece and bolt the head cover back in place
11 reinstall the air line and unit cover and secure with three cover screws
Parts Used:
-
Charles from GARRISON, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
18 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!