919167342 Craftsman Compressor - Overview

Diagrams for 919167342

See every part. Know exactly what you need.

Parts for the 919167342

Shroud

Part #N176201-D

Label

Part #A13282

Connect

Part #D23957

Bearing

Part #Z-AC-0140

Air Compressor Connecting Rod Cap

Part #ACG-29

This is a genuine DeVilbiss replacement part sourced directly from the manufacturer. The connecting cap is found in compressors from DeVilbiss, Porter Cable, and Black & Decker. This part is made of metal and is attached to the connecting rod in the motor. You will require a screwdriver or Allen wrench when replacing this part. This item is sold individually.

Screw 8Pk

Part #STD522507

This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with air compressors. The hex head screw is used to secure the motor assembly to the bracket on the tank of the compressor. These screws are sold in packs of eight pieces and the packs are sold individually.

O-ring 8Pk

Part #STD302011

It is a genuine item that is supplied by the original equipment manufacturer for use with Craftsman equipment. This is a high-quality replacement for a missing or a damaged o-ring which provides an air-tight seal between connected parts. Please make sure to refer to the appropriate diagrams of your model for the correct location and appli...Read more

Read less

Nut 5Pk

Part #STD541437

This is a genuine replacement part sourced from the original manufacturer for use with air compressors. The special five-pack of nuts are commonly used to fasten the bolt that connects the wheel to the frame. This nut five-pack is available as an individual replacement part, please see model diagram for associative parts.

Gauge Tank

Part #Z-D21923

Start Cap

Part #D23936

Capacitor

Part #D21477

Head

Part #AC-0037

Manuals & Care Guides for 919167342

Click to download

Common Symptoms of the 919167342

How this model fails, and the parts that fix it.

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

The air was bypassing the compressor gaskets and cylinder wall was worn out

18 of 24 people found this instruction helpful.

Charles from GARRISON, TX
Easy
30 - 60 mins
Screw drivers, Socket set

1 remove cover
2 unhook air line to tank
3 remove head bolts
4 remove intake from head
5 remove flywheel bolt to free up pump piston
6 remove screw on top of piston to change out gasket
7 remove the cylinder sleeve install piston from the top
8 reassemble piston rod end and the flywheel
9 on th ... Read more

Read less

Was this helpful?

Can't find this special screw used on many housings etc

4 of 6 people found this instruction helpful.

Tim from Tucson, AZ
Very Easy
15 - 30 mins

Actually don't like using Torx bits because they are hard to center deep in the channel. I had misplaced these forcing me to order replacements.
My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called ... Read more

Read less

Was this helpful?

Broken ground on original plug

2 of 2 people found this instruction helpful.

Debra from PRESCOTT VLY, AZ
Really Easy
15 - 30 mins
Screw drivers

Removed cover & old cord.
Replaced with new cord & replaced cover.
Works perfect.

Was this helpful?