This is a genuine DeVilbiss replacement part sourced directly from the manufacturer. The connecting cap is found in compressors from DeVilbiss, Porter Cable, and Black & Decker. This part is made of metal and is attached to the connecting rod in the motor. You will require a screwdriver or Allen wrench when replacing this part. This item is sold individually.
It is a genuine item that is supplied by the original equipment manufacturer for use with Craftsman equipment. This is a high-quality replacement for a missing or a damaged o-ring which provides an air-tight seal between connected parts. Please make sure to refer to the appropriate diagrams of your model for the correct location and appli...Read morecation of this component. Keep in mind it is made of high-quality rubber and is sold in a pack of eight.
This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with air compressors. The hex head screw is used to secure the motor assembly to the bracket on the tank of the compressor. These screws are sold in packs of eight pieces and the packs are sold individually.
This is a genuine replacement part sourced from the original manufacturer for use with air compressors. The special five-pack of nuts are commonly used to fasten the bolt that connects the wheel to the frame. This nut five-pack is available as an individual replacement part, please see model diagram for associative parts.
This is an authentic item that is supplied directly from the original equipment manufacturer for use with Air Compressors. The Outlet tube connects the cylinder head to the tank. This part is made out of aluminum. The most common reasons for replacing the outlet tube is if its cracked or leaks. This part is sold individually. Unplug the a...Read moreir compressor and bleed air from the tank before installing the air compressor outlet tube.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Anthony - For model number 919167320
December 21, 2019
Motor blows circuit breaker intermittently on start up and some times during restat while using. All breakers were 15 amps in different power circuits.
Hello Anthony and thanks for writing.
It sounds like faulty motor brushes. The engine in your unit was actually made by a different manufacturer; consequently, the replacement parts for your engine are listed under the engine's model number. If you can provide the model number, type/code number, and the brand of the engine itself, then we will be happy to find the parts you need. We do carry related parts for units just like yours. For example, part number PS10049093 Good luck with your repair.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The air was bypassing the compressor gaskets and cylinder wall was worn out
18 of 24 peoplefound this instruction helpful.
Charles from GARRISON, TX
Easy
30 - 60 mins
Screw drivers, Socket set
1 remove cover 2 unhook air line to tank 3 remove head bolts 4 remove intake from head 5 remove flywheel bolt to free up pump piston 6 remove screw on top of piston to change out gasket 7 remove the cylinder sleeve install piston from the top 8 reassemble piston rod end and the flywheel 9 on th
... Read moree head cover are two gaskets one on top and one on the bottom head 10 insert intake piece and bolt the head cover back in place 11 reinstall the air line and unit cover and secure with three cover screws
Read less
Was this helpful?
Thank you for voting!
Can't find this special screw used on many housings etc
4 of 6 peoplefound this instruction helpful.
Tim from Tucson, AZ
Very Easy
15 - 30 mins
Actually don't like using Torx bits because they are hard to center deep in the channel. I had misplaced these forcing me to order replacements. My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called
... Read more AGC-408 by craftsman.
Read less
Was this helpful?
Thank you for voting!
Broken ground on original plug
2 of 2 peoplefound this instruction helpful.
Debra from PRESCOTT VLY, AZ
Really Easy
15 - 30 mins
Screw drivers
Removed cover & old cord. Replaced with new cord & replaced cover. Works perfect.
My Orders
