This is a genuine DeVilbiss replacement part sourced directly from the manufacturer. The connecting cap is found in compressors from DeVilbiss, Porter Cable, and Black & Decker. This part is made of metal and is attached to the connecting rod in the motor. You will require a screwdriver or Allen wrench when replacing this part. This item is sold individually.
This is a genuine Craftsman replacement part. The O-ring seal is designed by the manufacturer for use in power tools such as chainsaws, air compressors, power washers, and grinders. This part includes eight flexible rubber O-rings, which may be found in various locations in the machine, depending on model. Please be aware that there ar...Read moree different O-rings used in the machine. Refer to the parts diagram to be sure of ordering the correct part.
This is an original OEM part. The connecting rod kit is constructed of metal and rubber parts. The piston and the crankshaft are fastened together by the connecting rod kit within the pump. It is recommended to refer to the specific manual and diagrams for repair instructions. This part is sold individually. A hex key and a wrench are necessary in the removal and replacement.
This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with air compressors. The hex head screw is used to secure the motor assembly to the bracket on the tank of the compressor. These screws are sold in packs of eight pieces and the packs are sold individually.
It is a genuine item that is supplied by the original equipment manufacturer for use with Craftsman equipment. This is a high-quality replacement for a missing or a damaged o-ring which provides an air-tight seal between connected parts. Please make sure to refer to the appropriate diagrams of your model for the correct location and appli...Read morecation of this component. Keep in mind it is made of high-quality rubber and is sold in a pack of eight.
This is a genuine replacement part sourced from the original manufacturer for use with air compressors. The special five-pack of nuts are commonly used to fasten the bolt that connects the wheel to the frame. This nut five-pack is available as an individual replacement part, please see model diagram for associative parts.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The air was bypassing the compressor gaskets and cylinder wall was worn out
18 of 24 peoplefound this instruction helpful.
Charles from GARRISON, TX
Easy
30 - 60 mins
Screw drivers, Socket set
1 remove cover 2 unhook air line to tank 3 remove head bolts 4 remove intake from head 5 remove flywheel bolt to free up pump piston 6 remove screw on top of piston to change out gasket 7 remove the cylinder sleeve install piston from the top 8 reassemble piston rod end and the flywheel 9 on th
... Read moree head cover are two gaskets one on top and one on the bottom head 10 insert intake piece and bolt the head cover back in place 11 reinstall the air line and unit cover and secure with three cover screws
My Orders
