919164180 Craftsman Compressor - Overview
Sections of the 919164180
[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
Tube
PartSelect #: PS10042309
Manufacturer #: AC-0097
This is an OEM part sourced directly from the manufacturer. The tube is commonly found in Craftsman air compressors. This part is made of metal, and is used to carry compressed air from the cylinder...
No Longer Available
Air Compressor Connecting Rod Cap
PartSelect #: PS10042502
Manufacturer #: ACG-29
This is a genuine DeVilbiss replacement part sourced directly from the manufacturer. The connecting cap is found in compressors from DeVilbiss, Porter Cable, and Black & Decker. This part is made of...
No Longer Available
O-ring Seal
PartSelect #: PS10051292
Manufacturer #: STD302008
This is a genuine Craftsman replacement part. The O-ring seal is designed by the manufacturer for use in power tools such as chainsaws, air compressors, power washers, and grinders. This part includ...
No Longer Available
O-ring 8Pk
PartSelect #: PS10051294
Manufacturer #: STD302011
It is a genuine item that is supplied by the original equipment manufacturer for use with Craftsman equipment. This is a high-quality replacement for a missing or a damaged o-ring which provides an ai...
No Longer Available
Questions And Answers for 919164180
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 919164180
[Viewing 2 of 2]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The air was bypassing the compressor gaskets and cylinder wall was worn out
1 remove cover
2 unhook air line to tank
3 remove head bolts
4 remove intake from head
5 remove flywheel bolt to free up pump piston
6 remove screw on top of piston to change out gasket
7 remove the cylinder sleeve install piston from the top
8 reassemble piston rod end and the flywheel
9 on the head cover are two gaskets one on top and one on the bottom head
10 insert intake piece and bolt the head cover back in place
11 reinstall the air line and unit cover and secure with three cover screws
2 unhook air line to tank
3 remove head bolts
4 remove intake from head
5 remove flywheel bolt to free up pump piston
6 remove screw on top of piston to change out gasket
7 remove the cylinder sleeve install piston from the top
8 reassemble piston rod end and the flywheel
9 on the head cover are two gaskets one on top and one on the bottom head
10 insert intake piece and bolt the head cover back in place
11 reinstall the air line and unit cover and secure with three cover screws
Parts Used:
-
Charles from GARRISON, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
18 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!