This is a genuine replacement part sourced from the original manufacturer for use with air compressors and generators. The flanged hex head bolt is used with several different types of equipment and t...
This safety valve is a genuine replacement part manufactured for use with air compressors. If the compressor's pressure switch malfunctions, and does not turn the motor off when the amount of pressure...
$13.48
Special Order
Questions And Answers for 919-16770
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Actually don't like using Torx bits because they are hard to center deep in the channel. I had misplaced these forcing me to order replacements. My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called AGC-408 by craftsman.
After replacing the piston, cylinder sleeve and O-rings, the old compressor works like a champ. The hardest part was getting the nut loose holding the piston & bearing in place. Two socket wrenches and a big hammer was able to break the nut loose and get it off.
