919-16737 (Type 0) Black and Decker Compressor - Overview

Sections of the 919-16737

[Viewing 2 of 2]

Page A

Page B

Parts for the 919-16737

[Viewing 12 of 56]

Screw

PartSelect #: PS10115994

Manufacturer #: D29132

Label Drain Tank Eng

PartSelect #: PS10116423

Manufacturer #: LA-3027

SCREW #8-32X.375/.34

PartSelect #: PS12509515

Manufacturer #: SUDL-9-1

$5.95

Nut .375-16 UNC-2B H

PartSelect #: PS10050689

Manufacturer #: SSF-8080-ZN

Air Hose

PartSelect #: PS10254689

Manufacturer #: A18309

BLOW GUN KIT

PartSelect #: PS12522516

Manufacturer #: N075781

$38.94

SCREW

PartSelect #: PS12512659

Manufacturer #: A19123

$5.95

TUBE SEAL

PartSelect #: PS12522478

Manufacturer #: N044359

This replacement tube seal is designed to prevent air leaks and maintain efficient compressor performance. Sold individually, it fits securely onto the outlet tube that connects to the head of the com...

$5.95

Valve

PartSelect #: PS17000937

Manufacturer #: D20114

This safety valve is a genuine replacement part manufactured for use with air compressors. If the compressor's pressure switch malfunctions, and does not turn the motor off when the amount of pressure...

$13.48

Micro Press. Switch

PartSelect #: PS10255234

Manufacturer #: N002119SV

This is a genuine replacement part sourced from the original manufacturer for use with horse power compressors made by Black and Decker. This pump activates the air compressor pump to turn on and off...

Air Hose

PartSelect #: PS10255239

Manufacturer #: N004086

Outlet Tube

PartSelect #: PS10255724

Manufacturer #: Z-A05346

This is a genuine replacement part sourced from the original manufacturer for use with horse power 15-gallon compressors made by Black and Decker. This part moves air from the cylinder head to the tan...

Questions And Answers for 919-16737

Be the first to ask our experts a question about this model!

Common Symptoms of the 919-16737

[Viewing 1 of 1]

Air leak

Fixed by
these parts

Show All

Installation Instructions of parts on the 919-16737

[Viewing 2 of 2]

Worn piston rod and sleeve

Disassemble plastic housing around compressor unit using appropriate tools. Remove the four bolts from the compressor head using a 5/16 nut driver. Carefully remove head assembly including airline. Remove bolt through rod bearing with Allen wrench.

Reassemble with new rod and piston assembly. Best to use blue locktite on bolt through rod bearing when reassembling. Make sure to torque all bolts to specs listed.

Parts Used: