919-16561 (Type 3) Black and Decker Compressor - Overview

Diagrams for 919-16561

See every part. Know exactly what you need.

Parts for the 919-16561

Connector Conduit 3/

Part #SSW-7482

Kit Connecting Rod

Part #A02743

Nipple Close 1/2 NPT

Part #1000003228

Label,Warning

Part #1000003082

Screw #10-32X.750 Fi

Part #D20605

Kit Comp Ring HP Rep

Part #K-0648

This is an authentic kit that has been sourced from the original manufacturer to be used with Black and Decker, Porter Cable and DeVilbiss air compressors. Over time parts may wear out causing poor performance and eventually requiring replacements. Refer to the appropriate diagrams for your model to ensure the correct repair procedure. Th...Read more

Read less

Screw and Washer

Part #5140118-82

Cover Intake Muffler

Part #AC-0783

Kit Connecting Rod H

Part #D24958

$52.82

Gauge

Part #A14993

This item has been OEM sourced to ensure a high level of quality. The gauge is intended to be used with air compressors from DeWalt. This part attaches to the regulator manifold and is used to indicate the air PSI within the tank. This item will require a torx driver set and a wrench set to install. The gauge is sold as an individual replacement part.

$37.33

Cover Pressure Switch

Part #A17326

It is a genuine item that is supplied directly from the original equipment manufacturer for use with air compressors. This is an identical replacement for a missing or a faulty cover for the pressure switch, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. It i...Read more

Read less

Label Logo Craftsman

Part #LA-3105

Common Symptoms of the 919-16561

How this model fails, and the parts that fix it.

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

The air was bypassing the compressor gaskets and cylinder wall was worn out

18 of 24 people found this instruction helpful.

Charles from GARRISON, TX
Easy
30 - 60 mins
Screw drivers, Socket set

1 remove cover
2 unhook air line to tank
3 remove head bolts
4 remove intake from head
5 remove flywheel bolt to free up pump piston
6 remove screw on top of piston to change out gasket
7 remove the cylinder sleeve install piston from the top
8 reassemble piston rod end and the flywheel
9 on th ... Read more

Read less

Was this helpful?

Can't find this special screw used on many housings etc

4 of 6 people found this instruction helpful.

Tim from Tucson, AZ
Very Easy
15 - 30 mins

Actually don't like using Torx bits because they are hard to center deep in the channel. I had misplaced these forcing me to order replacements.
My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called ... Read more

Read less

Was this helpful?