917990640 Craftsman Lawn Tractor - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Terminal cover – Part Number: 131563
No Longer Available
Terminal cover
Part #131563
Latch Spring – Part Number: 198200
No Longer Available
Latch Spring
Part #198200
Cap – Part Number: 105304X
No Longer Available
Cap
Part #105304X
Thrust Washer Sector Gear – Part Number: 194748
No Longer Available
Shoulder Bolt – Part Number: 194747
No Longer Available
Shoulder Bolt
Part #194747
Lawn Tractor Tire Valve Stem – Part Number: 65139
No Longer Available
Rod.Pedal.Cn – Part Number: 418185
No Longer Available
Rod.Pedal.Cn
Part #418185
Oil drain valve – Part Number: 428287
No Longer Available
Oil drain valve
Part #428287
Socket Assembly – Part Number: 175242
No Longer Available
Socket Assembly
Part #175242
Spark arrestor – Part Number: 137180
No Longer Available
Spark arrestor
Part #137180
Bushing Pm F – Part Number: 194737
No Longer Available
Bushing Pm F
Part #194737
Lawn Tractor Belt Keeper – Part Number: 198468
No Longer Available
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Right axle bent
1 person found this instruction helpful.
  • MATTHEW from PENNSBURG, PA
  • Very Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers, Wrench (Adjustable)
Replacing belt with no problem. I've ordered the front right axle spindle assembly three times. This is from your parts list and you sent me the part and they did not work at all.
Was this helpful?
Thank you for voting!
Worn out Mandrel Assemblies
2 of 6 people found this instruction helpful.
  • Joseph from CANBY, MN
  • Difficult
  • More than 2 hours
  • Socket set
Remove Deck, Remove Blades, Remove guards and belt, use old belt to hold pully to remove pully (would be good to have pully wrench), Remove mandrel Assembly, Install new mandrel assemblies (had to tap the new mandrel assemblies. Should have been done by manufacturer.). Reinstall blades, guards, and belt. Put deck back on.
Was this helpful?
Thank you for voting!