917986421 (Type 0) Craftsman Lawn Tractor - Overview

Diagrams for 917986421

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Retainer Spring – Part Number: 403187
No Longer Available
Retainer Spring
Part #403187
Terminal cover – Part Number: 131563
No Longer Available
Terminal cover
Part #131563
Spark arrestor – Part Number: 137180
No Longer Available
Spark arrestor
Part #137180
Belt – Part Number: 197253
No Longer Available
Belt
Part #197253
Engine Pulley – Part Number: 177968
No Longer Available
Engine Pulley
Part #177968
Oil drain tube – Part Number: 148456
No Longer Available
Oil drain tube
Part #148456
Mandrel Pull – Part Number: 173436
No Longer Available
Mandrel Pull
Part #173436
Lawn Tractor Washer – Part Number: 188967
No Longer Available
Lawn Tractor Washer
Part #188967
Ignition Chassis – Part Number: 194276
No Longer Available
Ignition Chassis
Part #194276
Lock nut – Part Number: 73680400
No Longer Available
Lock nut
Part #73680400
Cap – Part Number: 121232X
No Longer Available
Cap
Part #121232X
Lawn Tractor Deflector Shield Hinge Rod – Part Number: 131491
No Longer Available

Common Symptoms of the 917986421

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lound deck noise when mower put into motion
4 of 16 people found this instruction helpful.
  • Steven from Hickory, NC
  • Easy
  • Less than 15 mins
  • Socket set, Wrench set
Parked mower on level concrete drive, laid on cardboard. Lowered mower deck all the way. Sparayed some WD40 on nut/bolt on top of old pulley. Since it is a carriage type bolt, placed 5/8" boxed end wrench over self locking nut on top of old pulley. Using some force from 3lb mallet to break nut free (hitting against wrench body), the nut c ame off easy as did broken pulley/bearing inside. Installed new pulley assembly, re-tightened nut on bolt. Checked after first mowing just to be certain pulley was in place and locking nut tight.
Was this helpful?
Thank you for voting!