917447610 Craftsman Lawn Mower - Overview

Diagrams for 917447610

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Engine – Part Number: N/P
No Longer Available
Engine
Part #N/P
Operator
No Longer Available
Operator's manual, french
Part #115587831
Operator
No Longer Available
Operator's manual, spanish
Part #115587849
Kit.hsg.22+r – Part Number: 585951402
No Longer Available
Kit.hsg.22+r
Part #585951402
Cover drive assembly – Part Number: 580289901
No Longer Available
Cover drive assembly
Part #580289901
Bar, Lower Handle – Part Number: 585908202
No Longer Available
Bar, Lower Handle
Part #585908202
Lawn mower owner
No Longer Available
Lawn mower owner's manual
Part #115587827
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Front drive wheel locked up, causing the mower to not be able to be pushed.
4 of 12 people found this instruction helpful.
  • Walter from EVERETT, WA
  • Easy
  • Less than 15 mins
  • Socket set
Removed wheel by pressing off the plastic hub cap exposing the nut holding the wheel. I removed the nut, then pulled the wheel straight off the axel shaft. This exposed the broken dust cover. I they wiggled the dust cover off, cleaned the dirt from inside the wheel, placed the new dust cover, replaced the wheel, nut and hub cap.
Was this helpful?
Thank you for voting!
Multi rounded pins worn off where the blade turned very little with th mower running.
1 of 4 people found this instruction helpful.
  • Roger from ROSEBURG, OR
  • A Bit Difficult
  • 30 - 60 mins
  • Socket set, Wrench set
Once the blade was off, the blade adapter came off easily with a little help from WD40, and getting the new one on was simple with a few taps with a plastic hammer
Was this helpful?
Thank you for voting!