917388391 Craftsman Lawn Mower - Overview

Diagrams for 917388391

See every part. Know exactly what you need.

Page A

Parts for the 917388391

$38.95

Maintenance Kit

Part #5140B

This OEM maintenance kit is specifically designed and manufactured by Briggs and Stratton to provide peak performance in Briggs and Stratton engines. Protect your investment by giving your small engine the tune-up it needs to keep it running efficiently. This maintenance kit includes: 1 x 4-cyle 30W oil (18oz) 1 x Fuel Treatment and St...Read more

Read less

Engine Bolt

Part #150406

Rear Skirt Kit

Part #413160

Kit, O-Ring

Part #428450

Lawn & Garden Equipment Washer

Part #851074

Bolt.door.ye

Part #184193

Warning decal

Part #161058

Screw 8Pk

Part #STD601005

Rear Door Kit

Part #186612

Shoulder bolt

Part #160828

Ties 8Pk

Part #STD426600

Locknut

Part #STD541431

This replacement item is supplied by the original manufacturer for use with Craftsman lawn and garden equipment. It is an identical replacement for a missing or a faulty locknut that was installed on a new unit. This is a standard hardware that was installed on a new unit, please make sure to refer to the appropriate diagrams of your mode...Read more

Read less

Questions And Answers for 917388391

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Melanie - For model number 917388391

June 4, 2026

How to replace the Engine Zone Control Cable?

Hi Melanie, thank you for your inquiry. To replace it, start by removing the bolts on the recoil housing cover using an 8mm or 5/16 screwdriver and lift the cover off to access the brake assembly. At the bail, pry out the plastic clamp holding the cable and twist out the Z-fitting to disconnect the upper end. On the engine side, use locking pliers to pull the spring back and release tension on the cable, then pinch and slide the cable end through its slot to free it. Cut any zip ties securing the cable to the frame and the old cable is out. To install the new cable, push the lower end into the engine side slot and snap it into place, reconnect the spring, feed the upper Z-fitting through the bail hole, and press the plastic clamp back in. Secure the cable to the frame with a new zip tie, reinstall the cover, and tighten the bolts. Glad to be of help!

Was this helpful?

Tom - For model number 917388391

June 6, 2026

I need a replacement carburetor for craftsman 6.0 lawnmower ser 011300m

Hello Tom, thank you for reaching out to us. The carburetor assembly you are looking for is part number PS9152797. We hope this information helps!

Was this helpful?

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

My lawn mower blade wouldn’t stay in place. The old blade adapter had worn down and broken.

3 of 19 people found this instruction helpful.

Joel from ROSEVILLE, MN
Very Easy
Less than 15 mins
Socket set

I took off the old blade adapter and put the new one on. It literally requires removing one bolt. Unfortunately, once I started and ran my mower for a few minutes it blew up and left a charred patch of lawn. The underside of the mower is mangled metal and unusable now. The repair, though, was super easy!

Was this helpful?