917376060 Craftsman Lawn Mower - Overview

Diagrams for 917376060

See every part. Know exactly what you need.

Parts for the 917376060

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lawn Mower E-ring – Part Number: 12000058
No Longer Available
Lawn Mower E-ring
Part #12000058
Bar Control Drive – Part Number: 194185X428
No Longer Available
Bar Control Drive
Part #194185X428
Wheel.12x1.7 – Part Number: 431880X427
No Longer Available
Wheel.12x1.7
Part #431880X427
Mounting Bracket, Debris Shield – Part Number: 188839X004
No Longer Available
Control Bar – Part Number: 194199X428
No Longer Available
Control Bar
Part #194199X428
Screw, Self-Tapping #10-24 x 5/8 – Part Number: 150050
No Longer Available
Rear Skirt Kit – Part Number: 413160
No Longer Available
Rear Skirt Kit
Part #413160
Engine Bolt – Part Number: 150406
No Longer Available
Engine Bolt
Part #150406
Drive Pulley – Part Number: 194126
No Longer Available
Drive Pulley
Part #194126
Spring Retainer – Part Number: 150495
No Longer Available
Spring Retainer
Part #150495
Bearing – Part Number: 421836
No Longer Available
Bearing
Part #421836
Hex Head Bolt – Part Number: 428867
No Longer Available
Hex Head Bolt
Part #428867
View More

Common Symptoms of the 917376060

How this model fails, and the parts that fix it.

Will Not Start
Fixed by
these parts
Fixing
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Cable was broke.
6 of 7 people found this instruction helpful.
  • James from ASHTABULA, OH
  • Really Easy
  • 15 - 30 mins
  • Pliers
Pushed the cable through the engine mount.Connected the cable to the engine slider. Pulled cable through the previous tie down connected to the lower end of the bar. Attached the connector on the cable to the hole in the lawn mower bar near the top of the bar.. Attached the top end of the cable to the on/off bar where you push the mower.
Was this helpful?
Thank you for voting!
Drive cable broken
5 of 6 people found this instruction helpful.
  • Frank from AUSTIN, TX
  • Very Easy
  • Less than 15 mins
  • Nutdriver, Pliers
Remove the front drive cover and disconnect the old from the drive, hook the new drive cable to the drive, and connect new cable back to the handle. Reinstalled the drive cover, started unit, and test that the drive was working correctly.
Was this helpful?
Thank you for voting!
View More