917288701 (Type 0) Craftsman Lawn Tractor - Overview

Diagrams for 917288701

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Terminal cover – Part Number: 131563
No Longer Available
Terminal cover
Part #131563
Nut Push 625 – Part Number: 197290
No Longer Available
Nut Push 625
Part #197290
Engine Pulley – Part Number: 177968
No Longer Available
Engine Pulley
Part #177968
Cable – Part Number: 145491
No Longer Available
Cable
Part #145491
Spark arrestor – Part Number: 137180
No Longer Available
Spark arrestor
Part #137180
Premium mulching blade – Part Number: 139775
No Longer Available
Premium mulching blade
Part #139775
Belt – Part Number: 130969
No Longer Available
Belt
Part #130969
Bearing – Part Number: 110485X
No Longer Available
Bearing
Part #110485X
Mandrel spindle shaft assembly – Part Number: 192872
No Longer Available
Lawn Tractor Headlight Wire Harness – Part Number: 175688
No Longer Available
Reverse Pedal – Part Number: 197301X428
No Longer Available
Reverse Pedal
Part #197301X428
Hex bolt – Part Number: 173937
No Longer Available
Hex bolt
Part #173937

Common Symptoms of the 917288701

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lound deck noise when mower put into motion
4 of 16 people found this instruction helpful.
  • Steven from Hickory, NC
  • Easy
  • Less than 15 mins
  • Socket set, Wrench set
Parked mower on level concrete drive, laid on cardboard. Lowered mower deck all the way. Sparayed some WD40 on nut/bolt on top of old pulley. Since it is a carriage type bolt, placed 5/8" boxed end wrench over self locking nut on top of old pulley. Using some force from 3lb mallet to break nut free (hitting against wrench body), the nut c ame off easy as did broken pulley/bearing inside. Installed new pulley assembly, re-tightened nut on bolt. Checked after first mowing just to be certain pulley was in place and locking nut tight.
Was this helpful?
Thank you for voting!