Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ronnie - For model number 917288580
October 11, 2023
why does my lawnmower go to the left and dig down in the dirt"?
Hello Ronnie, thank you for getting in touch. Based on our understanding of the issue, we would suggest checking the wheel pressure. If the issue still occurs, you may need to replace the flange bearing, part number PS9006914. to fix the issue. We hope this helps!
Was this helpful?
Thank you for voting!
Thomas Degnan I - For model number 917288580
May 18, 2026
I am looking for a 54” replacement mower deck shell
Hi Thomas, thank you for contacting us. The deck shell you are looking for is part number PS18524032. Glad to be of help!
Was this helpful?
Thank you for voting!
Prev
1
Next
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Worn out Mandrel Assemblies
2 of 6 peoplefound this instruction helpful.
Joseph from CANBY, MN
Difficult
More than 2 hours
Socket set
Remove Deck, Remove Blades, Remove guards and belt, use old belt to hold pully to remove pully (would be good to have pully wrench), Remove mandrel Assembly, Install new mandrel assemblies (had to tap the new mandrel assemblies. Should have been done by manufacturer.). Reinstall blades, guards, and belt. Put deck back on.
Was this helpful?
Thank you for voting!
Dryer runs no heat
2 of 9 peoplefound this instruction helpful.
Russell from MACON, GA
Easy
15 - 30 mins
Screw drivers
Disassemble dryer. Replaced element assembly. Re assembled dryer. Unit runs and heats.