917288420 Craftsman Lawn Tractor - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Cable – Part Number: 145491
No Longer Available
Cable
Part #145491
Oil drain valve – Part Number: 428287
No Longer Available
Oil drain valve
Part #428287
Rod Brake K4 – Part Number: 403806
No Longer Available
Rod Brake K4
Part #403806
Oil drain tube – Part Number: 148456
No Longer Available
Oil drain tube
Part #148456
Thrust Washer Sector Gear – Part Number: 194748
No Longer Available
Nut Push 625 – Part Number: 197290
No Longer Available
Nut Push 625
Part #197290
Lawn Tractor Headlight Wire Harness – Part Number: 175688
No Longer Available
Bushing Pm F – Part Number: 194737
No Longer Available
Bushing Pm F
Part #194737
Bolt – Part Number: 171877
No Longer Available
Bolt
Part #171877
Screw – Part Number: 17490508
No Longer Available
Screw
Part #17490508
Socket Assembly – Part Number: 175242
No Longer Available
Socket Assembly
Part #175242
Shoulder Bolt – Part Number: 194747
No Longer Available
Shoulder Bolt
Part #194747

Questions And Answers for 917288420

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Clifford - For model number 917.288420
June 25, 2026
Belt came off and now will not start
Chris Boyle Profile
Hi Clifford, thank you for reaching out. Ensure that the belt itself is not damaged. If it is fine, then we would suggest checking the PTO switch, part number PS11824426. You may need to replace it to fix the issue. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the 917288420

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Worn out Mandrel Assemblies
2 of 6 people found this instruction helpful.
  • Joseph from CANBY, MN
  • Difficult
  • More than 2 hours
  • Socket set
Remove Deck, Remove Blades, Remove guards and belt, use old belt to hold pully to remove pully (would be good to have pully wrench), Remove mandrel Assembly, Install new mandrel assemblies (had to tap the new mandrel assemblies. Should have been done by manufacturer.). Reinstall blades, guards, and belt. Put deck back on.
Was this helpful?
Thank you for voting!
Dryer runs no heat
2 of 9 people found this instruction helpful.
  • Russell from MACON, GA
  • Easy
  • 15 - 30 mins
  • Screw drivers
Disassemble dryer. Replaced element assembly. Re assembled dryer. Unit runs and heats.
Was this helpful?
Thank you for voting!