917287380 Craftsman Lawn Tractor - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Cable – Part Number: 145491
No Longer Available
Cable
Part #145491
Lawn Tractor Tire Valve Stem – Part Number: 65139
No Longer Available
Rod Brake K4 – Part Number: 403806
No Longer Available
Rod Brake K4
Part #403806
Nut Push 625 – Part Number: 197290
No Longer Available
Nut Push 625
Part #197290
Mandrel spindle shaft assembly – Part Number: 192872
No Longer Available
Thread Control – Part Number: 175437X428
No Longer Available
Thread Control
Part #175437X428
Oil drain valve – Part Number: 428287
No Longer Available
Oil drain valve
Part #428287
Oil drain tube – Part Number: 148456
No Longer Available
Oil drain tube
Part #148456
Thrust Washer Sector Gear – Part Number: 194748
No Longer Available
Torsion Spring – Part Number: 197256
No Longer Available
Torsion Spring
Part #197256
Bolt – Part Number: 171877
No Longer Available
Bolt
Part #171877
Belt – Part Number: 197253
No Longer Available
Belt
Part #197253

Questions And Answers for 917287380

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Clarence - For model number 917287380
February 20, 2023
how do i remove solonoid from carburator?
Chris Boyle Profile
Hi Clarence, thank you for the question. If you want to remove the solenoid from the carburetor, make sure the ignition switch is in the off position and the key has been removed, if applicable. Lift up the hood or remove the engine cover. Disconnect the wire harness from the fuel shut-off solenoid and use locking pliers to crimp the fuel line. Now use a half-inch wrench to loosen the old solenoid, then unthread it from the carburetor bowl. Be prepared for some fuel spills. This is a general process, but it will help you remove this part. We hope this information helps!
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
Richard - For model number 917287380
November 14, 2024
Front axel bushings. Not shown in layout. ,750 id x ,91 od with flange.
Chris Boyle Profile
Hi Richard, Thank you for your question. The part number for the front axle bushing is PS16572523. We hope this helps!
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the 917287380

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dryer runs no heat
2 of 9 people found this instruction helpful.
  • Russell from MACON, GA
  • Easy
  • 15 - 30 mins
  • Screw drivers
Disassemble dryer. Replaced element assembly. Re assembled dryer. Unit runs and heats.
Was this helpful?
Thank you for voting!
fornt link came off and i ran it over and bent it.
11 of 43 people found this instruction helpful.
  • Robert from GRAND JCT, CO
  • Very Easy
  • Less than 15 mins
  • Pliers
it was easy to repair just put new one on and replaced the clips and it was finished, Great part and very good quality.
Was this helpful?
Thank you for voting!