917287261 (Type 0) Craftsman Lawn Tractor - Overview

Diagrams for 917287261

See every part. Know exactly what you need.

Parts for the 917287261

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Terminal cover – Part Number: 131563
No Longer Available
Terminal cover
Part #131563
Nut Push 625 – Part Number: 197290
No Longer Available
Nut Push 625
Part #197290
Engine Pulley – Part Number: 177968
No Longer Available
Engine Pulley
Part #177968
Thread Control – Part Number: 175437X428
No Longer Available
Thread Control
Part #175437X428
Belt – Part Number: 197253
No Longer Available
Belt
Part #197253
Cable – Part Number: 145491
No Longer Available
Cable
Part #145491
Spark arrestor – Part Number: 137180
No Longer Available
Spark arrestor
Part #137180
Premium mulching blade – Part Number: 139775
No Longer Available
Premium mulching blade
Part #139775
Lawn Tractor Blade Engagement Lever Handle – Part Number: 198398X428
No Longer Available
Lawn Tractor Blade Engagement Lever Assembly – Part Number: 199972
No Longer Available
Belt – Part Number: 130969
No Longer Available
Belt
Part #130969
Bearing – Part Number: 110485X
No Longer Available
Bearing
Part #110485X
View More

Common Symptoms of the 917287261

How this model fails, and the parts that fix it.

Will Not Start
Fixed by
these parts
Fixing
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lound deck noise when mower put into motion
4 of 16 people found this instruction helpful.
  • Steven from Hickory, NC
  • Easy
  • Less than 15 mins
  • Socket set, Wrench set
Parked mower on level concrete drive, laid on cardboard. Lowered mower deck all the way. Sparayed some WD40 on nut/bolt on top of old pulley. Since it is a carriage type bolt, placed 5/8" boxed end wrench over self locking nut on top of old pulley. Using some force from 3lb mallet to break nut free (hitting against wrench body), the nut c ame off easy as did broken pulley/bearing inside. Installed new pulley assembly, re-tightened nut on bolt. Checked after first mowing just to be certain pulley was in place and locking nut tight.
Read less
Was this helpful?
Thank you for voting!
View More