917276641 (Type 0) Craftsman Lawn Tractor - Overview

Diagrams for 917276641

See every part. Know exactly what you need.

Parts for the 917276641

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Terminal cover – Part Number: 131563
No Longer Available
Terminal cover
Part #131563
Nut Push 625 – Part Number: 197290
No Longer Available
Nut Push 625
Part #197290
Engine Pulley – Part Number: 177968
No Longer Available
Engine Pulley
Part #177968
Belt – Part Number: 197253
No Longer Available
Belt
Part #197253
Premium mulching blade – Part Number: 139775
No Longer Available
Premium mulching blade
Part #139775
Spark arrestor – Part Number: 137180
No Longer Available
Spark arrestor
Part #137180
Lawn Tractor Blade Engagement Lever Assembly – Part Number: 199972
No Longer Available
Bearing – Part Number: 110485X
No Longer Available
Bearing
Part #110485X
Mandrel spindle shaft assembly – Part Number: 192872
No Longer Available
Side Hood Vent – Part Number: 198968X428
No Longer Available
Side Hood Vent
Part #198968X428
Hex bolt – Part Number: 173937
No Longer Available
Hex bolt
Part #173937
Hub axle cap – Part Number: 104757X645
No Longer Available
Hub axle cap
Part #104757X645
View More

Common Symptoms of the 917276641

How this model fails, and the parts that fix it.

Will Not Start
Fixed by
these parts
Fixing
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lound deck noise when mower put into motion
4 of 16 people found this instruction helpful.
  • Steven from Hickory, NC
  • Easy
  • Less than 15 mins
  • Socket set, Wrench set
Parked mower on level concrete drive, laid on cardboard. Lowered mower deck all the way. Sparayed some WD40 on nut/bolt on top of old pulley. Since it is a carriage type bolt, placed 5/8" boxed end wrench over self locking nut on top of old pulley. Using some force from 3lb mallet to break nut free (hitting against wrench body), the nut c ame off easy as did broken pulley/bearing inside. Installed new pulley assembly, re-tightened nut on bolt. Checked after first mowing just to be certain pulley was in place and locking nut tight.
Read less
Was this helpful?
Thank you for voting!
View More