917275702 (Type 0) Craftsman Lawn Tractor - Overview

Diagrams for 917275702

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Pulley, V, Idler – Part Number: 193195
No Longer Available
Pulley, V, Idler
Part #193195
Axle brace – Part Number: 169827
No Longer Available
Axle brace
Part #169827
Plunger cap – Part Number: 71673
No Longer Available
Plunger cap
Part #71673
Hex locknut with washer insert – Part Number: 73800800
No Longer Available
Cap Spring – Part Number: 124238X
No Longer Available
Cap Spring
Part #124238X
Engine Pulley – Part Number: 177968
No Longer Available
Engine Pulley
Part #177968
Lawn Tractor Steering Shaft Bushing – Part Number: 155105
No Longer Available
Belt keeper – Part Number: 154778
No Longer Available
Belt keeper
Part #154778
Pulley Idler – Part Number: 193198
No Longer Available
Pulley Idler
Part #193198
Arm Spring – Part Number: 175016
No Longer Available
Arm Spring
Part #175016
Cable – Part Number: 145491
No Longer Available
Cable
Part #145491
Spark arrestor – Part Number: 137180
No Longer Available
Spark arrestor
Part #137180

Common Symptoms of the 917275702

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lound deck noise when mower put into motion
4 of 16 people found this instruction helpful.
  • Steven from Hickory, NC
  • Easy
  • Less than 15 mins
  • Socket set, Wrench set
Parked mower on level concrete drive, laid on cardboard. Lowered mower deck all the way. Sparayed some WD40 on nut/bolt on top of old pulley. Since it is a carriage type bolt, placed 5/8" boxed end wrench over self locking nut on top of old pulley. Using some force from 3lb mallet to break nut free (hitting against wrench body), the nut c ame off easy as did broken pulley/bearing inside. Installed new pulley assembly, re-tightened nut on bolt. Checked after first mowing just to be certain pulley was in place and locking nut tight.
Was this helpful?
Thank you for voting!