917273980 (Type 0) Craftsman Lawn Tractor - Overview

Diagrams for 917273980

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Retainer Spring – Part Number: 403187
No Longer Available
Retainer Spring
Part #403187
Engine Pulley – Part Number: 177968
No Longer Available
Engine Pulley
Part #177968
Spark arrestor – Part Number: 137180
No Longer Available
Spark arrestor
Part #137180
Belt – Part Number: 197253
No Longer Available
Belt
Part #197253
Lawn Tractor Blade Engagement Lever Assembly – Part Number: 199972
No Longer Available
Front Axle – Part Number: 413591
No Longer Available
Front Axle
Part #413591
Oil drain tube – Part Number: 148456
No Longer Available
Oil drain tube
Part #148456
Lawn Tractor Deflector Shield Hinge Rod – Part Number: 131491
No Longer Available
Idler Pulley – Part Number: 196106
No Longer Available
Idler Pulley
Part #196106
Arm Brake – Part Number: 199478
No Longer Available
Arm Brake
Part #199478
Retainer Clip – Part Number: 199849
No Longer Available
Retainer Clip
Part #199849
Brake Linkage – Part Number: 199918
No Longer Available
Brake Linkage
Part #199918

Common Symptoms of the 917273980

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lound deck noise when mower put into motion
4 of 16 people found this instruction helpful.
  • Steven from Hickory, NC
  • Easy
  • Less than 15 mins
  • Socket set, Wrench set
Parked mower on level concrete drive, laid on cardboard. Lowered mower deck all the way. Sparayed some WD40 on nut/bolt on top of old pulley. Since it is a carriage type bolt, placed 5/8" boxed end wrench over self locking nut on top of old pulley. Using some force from 3lb mallet to break nut free (hitting against wrench body), the nut c ame off easy as did broken pulley/bearing inside. Installed new pulley assembly, re-tightened nut on bolt. Checked after first mowing just to be certain pulley was in place and locking nut tight.
Was this helpful?
Thank you for voting!