917256830 Craftsman Lawn Tractor - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Puller-flywheel – Part Number: 19203
$33.95
Special Order
Puller-flywheel
Part #19203
This flywheel puller is designed for servicing larger small engines by safely removing tightly seated flywheels without stressing the crankshaft or damaging ignition components. Constructed from heavy-duty steel and engineered to apply even pulling force, it makes accessing the magneto, crankshaft key, or ignition system straightforward during repairs or overhauls. Built to OEM specifications for durability and precise fit, it’s a reliable tool for maintaining lawn mowers, generators, and pressure washers with compatible engines.
Engine Oil Seal – Part Number: 291675S
$12.95
Special Order
Engine Oil Seal
Part #291675S
It is a genuine item that is supplied by the original equipment manufacturer for Briggs and Stratton engines commonly installed on a variety of lawn and garden equipment. This is a special component that provides a tight seal for the PTO side of the crankcase. Over time it may wear out and begin to crack eventually requiring a replacement. Check the appropriate diagrams for your specific model to ensure the correct installation of the new seal-oil. To perform this repair you will need a variety of tools such as a screwdriver, a wrench set, pliers and a tool to pick out the old seal. Make sure to drain the oil before starting this repair. Keep in mind, one durable rubber part is included.
Pin-piston/std – Part Number: 299691
$31.95
Special Order
Pin-piston/std
Part #299691
This is an authentic replacement part that has been sourced from the original manufacturer to be used with small engines from Briggs & Stratton and Toro. The metal pin is used to connect the connecting rod to the piston assembly. This item is available as an individual replacement part, please see illustrated diagram for associative parts.
Filter-pre Cleaner – Part Number: 272403S
$6.95
Special Order
Filter-pre Cleaner
Part #272403S
This replacement foam filter element is used on Briggs and Stratton engines installed on lawn and garden equipment. It is an authentic OEM sourced part, not an aftermarket equivalent. This filter adds a second layer of protection against the dust and debris. Please note, the main pleated paper filter is sold separately. No tools are needed to replace this filter. • Remove the cover knob • Remove the filter cover • Take out the old filter • Secure the new one • Secure the filter cover
Pin-piston/std – Part Number: 298909
$15.95
Special Order
Pin-piston/std
Part #298909
Brush Set – Part Number: 497608
$49.95
Special Order
Brush Set
Part #497608
Ring Set-std – Part Number: 495854
$144.95
Special Order
Ring Set-std
Part #495854
Breather Assembly – Part Number: 495735
$81.95
Special Order
Breather Assembly
Part #495735
This is a genuine replacement part manufactured for use with small engines. The breather assembly is commonly used to release combustion gasses that can become trapped in the crankcase. This breather assembly includes the breather gasket, please note the breather tube is available separately.
Connector-hose – Part Number: 692317
$12.95
In Stock
Connector-hose
Part #692317
This is a Genuine Manufacturer Sourced replacement part used on a a variety of Engines. This is a Fuel Line Connector connects the fuel line to the carburetor. This part is made out of Plastic and Metal, it is Sold Individually.
Key-woodruff – Part Number: 691639
$7.95
Special Order
Key-woodruff
Part #691639
This is an authentic Briggs & Stratton replacement part manufactured for use with small engines. The timing key is used to fit into the slot on the crankshaft and into the key-way on the timing gear. This allows the timing gear to rotate with the crankshaft. The timing gear is available as an individual replacement part, please see model diagram for associative parts.
Clamp-hose – Part Number: 791850
$5.95
Special Order
Clamp-hose
Part #791850
This is a genuine manufacturer-sourced part which is designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged clamp that is used to secure the hose. Keep in mind this high-quality product is made of durable metal and is sold individually. Please make sure to check the appropriate diagrams for your model for the correct location and application of this hardware.
Screw – Part Number: 791680
$6.95
Special Order
Screw
Part #791680

Common Symptoms of the 917256830

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Stopped running. Turned to be a bent intake push rod and broken rocker arm
9 of 15 people found this instruction helpful.
  • Rene from COVINGTON, LA
  • Really Easy
  • 1- 2 hours
  • Nutdriver, Socket set, Wrench set
Removed head. Replaced both rocker arms, intake pus rod, push rod guide exhaust and head gaskets. Torqued head in 3 stages to 216 in/lbs. gapped intake to .004 and exhaust to .006 at TDC

Added oil and gas. Now running great

If you need to replace push rods use steel (exhaust) they are the same length
The engine was a Briggs & Stratton 217802 0113 E10604 (2006 year date code)
I used the following
796189 gasket
272475S gasket
697494 push rod
690822 push rod guide
691751 rocker arms
Was this helpful?
Thank you for voting!