917256660 Craftsman Lawn Tractor - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Puller-flywheel – Part Number: 19203
$33.95
Special Order
Puller-flywheel
Part #19203
This flywheel puller is designed for servicing larger small engines by safely removing tightly seated flywheels without stressing the crankshaft or damaging ignition components. Constructed from heavy-duty steel and engineered to apply even pulling force, it makes accessing the magneto, crankshaft key, or ignition system straightforward during repairs or overhauls. Built to OEM specifications for durability and precise fit, it’s a reliable tool for maintaining lawn mowers, generators, and pressure washers with compatible engines.
Brush Set – Part Number: 497608
$49.95
Special Order
Brush Set
Part #497608
Ring Set-std – Part Number: 394959
$110.95
Special Order
Ring Set-std
Part #394959
The standard ring set is part of the standard piston assembly. These are authentic Briggs & Stratton and Toro replacement parts that are sourced from the original manufacturer for use with engines, generators, and lawn mowers. They are made out of metal. When replacing these parts a set of pliers might be required during the installation process. These items may become broken or bent and will need to be replaced.
Kit-needle/seat – Part Number: 394683
$23.95
Special Order
Kit-needle/seat
Part #394683
This is an authentic Briggs & Stratton replacement part. The needle valve is designed by the manufacturer for use in engines. This part includes the needle, a spring retainer, and a bearing, and it is placed in the carburetor assembly to control the flow of fuel. You may require a screwdriver when replacing this part. This item is sold individually.
Engine Oil Seal – Part Number: 291675S
$12.95
Special Order
Engine Oil Seal
Part #291675S
It is a genuine item that is supplied by the original equipment manufacturer for Briggs and Stratton engines commonly installed on a variety of lawn and garden equipment. This is a special component that provides a tight seal for the PTO side of the crankcase. Over time it may wear out and begin to crack eventually requiring a replacement. Check the appropriate diagrams for your specific model to ensure the correct installation of the new seal-oil. To perform this repair you will need a variety of tools such as a screwdriver, a wrench set, pliers and a tool to pick out the old seal. Make sure to drain the oil before starting this repair. Keep in mind, one durable rubber part is included.
Pin-piston/std – Part Number: 299691
$31.95
Special Order
Pin-piston/std
Part #299691
This is an authentic replacement part that has been sourced from the original manufacturer to be used with small engines from Briggs & Stratton and Toro. The metal pin is used to connect the connecting rod to the piston assembly. This item is available as an individual replacement part, please see illustrated diagram for associative parts.
Keeper-valve – Part Number: 494553
$13.95
Special Order
Keeper-valve
Part #494553
Filter-a/c Cartridge – Part Number: 394019S
$37.95
Special Order
Filter-a/c Cartridge
Part #394019S
This high quality air cleaner cartridge is an authentic OEM sourced item designed for use with Briggs and Stratton engines commonly utilized on Toro lawn and garden equipment. It is used to remove the dust and other contaminants the from the air going into the carburetor. This pleated paper cartridge is sold individually. Please note, the foam pre-cleaner is not included, it is sold separately. Replacing this filter-air cleaner cartridge is a very simple task that does not require any tools. • Remove the cover • Take out the old cartridge • Secure the new cartridge • Secure the cover back
Gasket-cylinder Head – Part Number: 271868S
$19.95
Special Order
Gasket-cylinder Head
Part #271868S
This high quality replacement part is sourced from original equipment manufacturer for use with Briggs and Stratton engines that are commonly installed on Toro lawn and garden equipment. It is specially designed to provide an air-tight seal for the cylinder head. Please note this durable composite material gasket is sold individually.
Gasket-crkcse/009 – Part Number: 271189
$19.95
Special Order
Gasket-crkcse/009
Part #271189
This is an authentic replacement part, sourced from the original manufacturer for use with small engines from Briggs & Stratton and Toro. The gasket is used to provide spacing and to seal the connection between the engine sump and the crankcase. This item is available as an individual replacement part.
Key-flywheel – Part Number: 222698S
$5.95
In Stock
Key-flywheel
Part #222698S
This is a Genuine OEM replacement part used on a variety of Lawn and Garden equipment. The key helps to secure Flywheel in place. This is a Metal Key and it is Sold Individually. You would need Pliers to replace this item.
Bushing-valve Guide – Part Number: 231218
$25.95
Special Order
Bushing-valve Guide
Part #231218
This genuine item is supplied by the original equipment manufacturer for use with engines, generators, lawn mowers, lawn tractors, and snowblowers made by Briggs & Stratton, Toro, Lawn Boy, and Murray. The valve guide bushing is made out of metal. It may require a screwdriver and a wrench during installation. This part will need to be replaced if it breaks. This item is sold individually.

Manuals & Care Guides for 917256660

Click to download
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bad governor
12 of 24 people found this instruction helpful.
  • John from BROOKVILLE, IN
  • Easy
  • 1- 2 hours
  • Nutdriver, Pliers, Socket set, Wrench set
Look on YouTube for video's on how to replace a Briggs governor. There are several there. My favorite, with best explanation, is, "Easily Replace Briggs Governor Gear (V-Twin Intek Engine) with Taryl". https://www.youtube.com/watch?v=wn3eanGxSEA&t=152s.

Taryl (probably not his real name) does a very good job of showing step-by- step the whole procedure, along with some additional hints/tricks/techniques of value.

Not including oil and filter, I spent less than $50 for a new governor, gasket, and drive shaft seal. That's all that is really necessary to replace is those three parts. That is, unless pieces of the old governor tore up a gear, valve, or something else. Inspect everything! {I was lucky and only the governor was destroyed}

One word of note. Be sure to clean out all of the debris from the blown governor. Be sure to remove the spark plugs and carefully rotate the drive shaft while looking for nooks-and-crannies where debris can hide. I tried to use a magnet to help, but it didn't help much, even though the block is aluminum.

Good luck.
Was this helpful?
Thank you for voting!
The tie rod on my 20 year-old lawn tractor snapped.
1 person found this instruction helpful.
  • James from CEDAR SPRINGS, MI
  • Very Easy
  • Less than 15 mins
  • Wrench set
I used two wrenches, unscrewed both ends of the old tie rod and it fell out. In nearly no time, I had the new one in. After finding the right end wrenches, I don't think I had more than 10 minutes into the project. Easiest repair I have done on anything in a long time!
Was this helpful?
Thank you for voting!