917256410 Craftsman Lawn Tractor - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Puller-flywheel – Part Number: 19203
$33.95
Special Order
Puller-flywheel
Part #19203
This flywheel puller is designed for servicing larger small engines by safely removing tightly seated flywheels without stressing the crankshaft or damaging ignition components. Constructed from heavy-duty steel and engineered to apply even pulling force, it makes accessing the magneto, crankshaft key, or ignition system straightforward during repairs or overhauls. Built to OEM specifications for durability and precise fit, it’s a reliable tool for maintaining lawn mowers, generators, and pressure washers with compatible engines.
Gasket Set-engine – Part Number: 494241
$69.95
Special Order
Gasket Set-engine
Part #494241
This part is an OEM from Briggs & Stratton. The engine gasket set is composed of cardboard composite gaskets, rubber seals and other components used to seal engine parts. The set is compatible with many lawn tractor engines, and is sold individually. A socket set and a wrench set are needed for making the replacement.
Engine Oil Seal – Part Number: 291675S
$12.95
Special Order
Engine Oil Seal
Part #291675S
It is a genuine item that is supplied by the original equipment manufacturer for Briggs and Stratton engines commonly installed on a variety of lawn and garden equipment. This is a special component that provides a tight seal for the PTO side of the crankcase. Over time it may wear out and begin to crack eventually requiring a replacement. Check the appropriate diagrams for your specific model to ensure the correct installation of the new seal-oil. To perform this repair you will need a variety of tools such as a screwdriver, a wrench set, pliers and a tool to pick out the old seal. Make sure to drain the oil before starting this repair. Keep in mind, one durable rubber part is included.
Keeper-valve – Part Number: 494553
$13.95
Special Order
Keeper-valve
Part #494553
Pin-piston/std – Part Number: 299691
$31.95
Special Order
Pin-piston/std
Part #299691
This is an authentic replacement part that has been sourced from the original manufacturer to be used with small engines from Briggs & Stratton and Toro. The metal pin is used to connect the connecting rod to the piston assembly. This item is available as an individual replacement part, please see illustrated diagram for associative parts.
Bushing-valve Guide – Part Number: 231218
$25.95
Special Order
Bushing-valve Guide
Part #231218
This genuine item is supplied by the original equipment manufacturer for use with engines, generators, lawn mowers, lawn tractors, and snowblowers made by Briggs & Stratton, Toro, Lawn Boy, and Murray. The valve guide bushing is made out of metal. It may require a screwdriver and a wrench during installation. This part will need to be replaced if it breaks. This item is sold individually.
Filter-pre Cleaner – Part Number: 272403S
$6.95
Special Order
Filter-pre Cleaner
Part #272403S
This replacement foam filter element is used on Briggs and Stratton engines installed on lawn and garden equipment. It is an authentic OEM sourced part, not an aftermarket equivalent. This filter adds a second layer of protection against the dust and debris. Please note, the main pleated paper filter is sold separately. No tools are needed to replace this filter. • Remove the cover knob • Remove the filter cover • Take out the old filter • Secure the new one • Secure the filter cover
Pin-piston/std – Part Number: 298909
$15.95
Special Order
Pin-piston/std
Part #298909
Brush Set – Part Number: 497608
$49.95
Special Order
Brush Set
Part #497608
Ring Set-std – Part Number: 499996
$110.95
Special Order
Ring Set-std
Part #499996
This is an authentic OEM sourced replacement piston ring set which is specially produced for Briggs and Stratton engines commonly installed on lawn and garden equipment. The purpose of these parts is to provide a tight seal between the piston and the cylinder walls. A worn or broken piston ring will allow combustion gases to escape the seal and enter the crankcase, this would cause low compression and a loss of power. If compression is reduced significantly, the engine will not run at all. Please note this high-quality metal set is sold individually.
Engine Spark Plug Terminal – Part Number: 493880S
$5.95
Special Order
Engine Spark Plug Terminal
Part #493880S
This spark plug terminal is supplied directly from the original equipment manufacturer. The metal terminal is designed to fasten the spark plug to the engine lead wire. This component is sold individually, and needle nose pliers are helpful with the repair. Please refer to the appropriate diagrams of your engine model for the proper application of this hardware.
Breather Assembly – Part Number: 495735
$81.95
Special Order
Breather Assembly
Part #495735
This is a genuine replacement part manufactured for use with small engines. The breather assembly is commonly used to release combustion gasses that can become trapped in the crankcase. This breather assembly includes the breather gasket, please note the breather tube is available separately.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
replaced worn parts
11 of 19 people found this instruction helpful.
  • paul from VADER, WA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set, Wrench set
took old off, put new on
Was this helpful?
Thank you for voting!