Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jeff - For model number 917250240
July 8, 2026
Drive belt to rear wheels
Hi Jeff, thank you for contacting us. The drive belt for your model is part number PS18530859. It turns the transmission pulley to move the tractor. We hope this is what you were looking for!
2 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Steve - For model number 917250240
April 18, 2024
Won’t restart after turning on PTO. Acts like no power.
Hi Steve, thank you for reaching out. We would suggest checking the PTO switch, part number PS11970168. It allows the user to engage blades. You may need to replace it to fix the issue. We hope that helps!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Prev
1
Next
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Worn out Mandrel Assemblies
2 of 6 peoplefound this instruction helpful.
Joseph from CANBY, MN
Difficult
More than 2 hours
Socket set
Remove Deck, Remove Blades, Remove guards and belt, use old belt to hold pully to remove pully (would be good to have pully wrench), Remove mandrel Assembly, Install new mandrel assemblies (had to tap the new mandrel assemblies. Should have been done by manufacturer.). Reinstall blades, guards, and belt. Put deck back on.
Was this helpful?
Thank you for voting!
Dryer runs no heat
2 of 9 peoplefound this instruction helpful.
Russell from MACON, GA
Easy
15 - 30 mins
Screw drivers
Disassemble dryer. Replaced element assembly. Re assembled dryer. Unit runs and heats.