917204081 Craftsman Lawn Tractor - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oil drain valve – Part Number: 428287
No Longer Available
Oil drain valve
Part #428287
Oil drain tube – Part Number: 148456
No Longer Available
Oil drain tube
Part #148456
Lawn Tractor Forward Pedal Pad – Part Number: 421263
No Longer Available
Thrust Washer Sector Gear – Part Number: 194748
No Longer Available
Rod.Pedal.Cn – Part Number: 418185
No Longer Available
Rod.Pedal.Cn
Part #418185
Bushing Pm F – Part Number: 194737
No Longer Available
Bushing Pm F
Part #194737
Washer – Part Number: 7563R
No Longer Available
Washer
Part #7563R
Lawn Tractor Tire Valve Stem – Part Number: 65139
No Longer Available
Shoulder Bolt – Part Number: 194747
No Longer Available
Shoulder Bolt
Part #194747
Screw – Part Number: 17490508
No Longer Available
Screw
Part #17490508
Socket Assembly – Part Number: 175242
No Longer Available
Socket Assembly
Part #175242
Washer – Part Number: 19091416
No Longer Available
Washer
Part #19091416

Common Symptoms of the 917204081

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Right axle bent
1 person found this instruction helpful.
  • MATTHEW from PENNSBURG, PA
  • Very Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers, Wrench (Adjustable)
Replacing belt with no problem. I've ordered the front right axle spindle assembly three times. This is from your parts list and you sent me the part and they did not work at all.
Was this helpful?
Thank you for voting!
Worn out Mandrel Assemblies
2 of 6 people found this instruction helpful.
  • Joseph from CANBY, MN
  • Difficult
  • More than 2 hours
  • Socket set
Remove Deck, Remove Blades, Remove guards and belt, use old belt to hold pully to remove pully (would be good to have pully wrench), Remove mandrel Assembly, Install new mandrel assemblies (had to tap the new mandrel assemblies. Should have been done by manufacturer.). Reinstall blades, guards, and belt. Put deck back on.
Was this helpful?
Thank you for voting!