900271220 Craftsman Reciprocating Saw - Overview

This M4.55 x 32 mm Plastite screw is made to form secure threads in plastic tool housings. It has a T20 Torx drive and is used in select handles, covers, and motor housings. Use the complete tool model and type number to guarantee the proper fit. Check the parts diagram for its exact location before installation. Unplug the tool or remove...Read more its battery before repair. Start the screw by hand and do not overtighten it, as too much force can strip or crack the plastic.

This is an authentic replacement part sourced directly from the manufacturer. The screw is commonly found in saws from DeWALT and Black & Decker. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts ...Read morediagram to be sure of ordering the correct part. You will require a screwdriver when replacing this item. The screw is available as an individual replacement part.

This is an authentic part assembled by the original manufacturer. It is compatible with Black & Decker, Porter Cable, and DeWALT saws and other handheld power tools. A bearing acts as a buffer between moving parts. This reduces friction between those parts. Bearings also stabilize and hold metal parts, preventing damage from incorrect dir...Read moreectional movement. These are highly worn parts and require replacement fairly often when in regular use. This bearing is sold individually. Please note that on most of these tools, there are two different needle bearings used. This is the topmost bearing, located closer to the gear cover plate. The other is sold separately.

This is an original replacement part manufactured for use with electric power tools. The special sleeve is commonly used to provide spacing between the armature bearing and the motor housing. This sleeve is available as an individual replacement part, please see model diagram for associative parts.