900271210 Craftsman Cordless Drill - Overview

Diagrams for 900271210

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ball Bearing – Part Number: 330003-09
No Longer Available
Ball Bearing
Part #330003-09
608Lz – Part Number: STD315483
No Longer Available
608Lz
Part #STD315483
Plug 120V 2Wire – Part Number: 234900-02
No Longer Available
Plug 120V 2Wire
Part #234900-02
Ndl Bearing – Part Number: 93128-00
No Longer Available
Ndl Bearing
Part #93128-00
Sleeve – Part Number: 445217-02
$7.44
Special Order
Sleeve
Part #445217-02
This is an original replacement part manufactured for use with electric power tools. The special sleeve is commonly used to provide spacing between the armature bearing and the motor housing. This sleeve is available as an individual replacement part, please see model diagram for associative parts.
Brush Spring – Part Number: 445860-00
$7.44
Special Order
Brush Spring
Part #445860-00
This is a genuine OEM replacement part, it is sold individually. This part is used to keep the brush tight against the armature so the tool will work properly. Over time when the brushes wear down and heat is created, the spring may lose its tension and will have to be replaced.
Contact Strip – Part Number: 445882-00
$7.44
Special Order
Contact Strip
Part #445882-00
This is a genuine OEM sourced part that is intended to be used with gauge shears, grinders, joiners, drywall scruguns, screwdrivers, and holguns from Black & Decker and DeWalt. The metal contact strip is part of the motor assembly. This item is used to transfer electricity from the switch to the brush ring. This item is sold as an individual replacement part.
Cord/10ft./18-2 – Part Number: 448557-98
$43.12
Special Order
Cord/10ft./18-2
Part #448557-98
This replacement 10 foot power cord is specially produced for Black and Decker and Dewalt power tools. It is designed to connect to a standard US outlet supplying power to the tool. Please note one rubber insulated cord is included per order, the cord protector is not included it is sold separately. To complete this repair you will need a screwdriver.
L.h. Screw – Part Number: 448847-01
No Longer Available
L.h. Screw
Part #448847-01
The left hand screw is an original part from DeWalt. The metal screw is made for use with several drill devices, and is sold individually. The screw is designed to help connect the drill chuck. A hex key or Allen wrench is helpful for the installation.
Screw – Part Number: 330019-10
$7.44
Special Order
Screw
Part #330019-10
This is an authentic replacement part that is OEM sourced to be used with circular saws, drills, sanders, cut-off tools, rotary hammers, and planers. This screw is used with different types of power tools and the application of the screw varies depending on the model of equipment. Please see your model's diagram to confirm the screw's compatibility and usage. This item is available as an individual replacement part.
Plastite Screw – Part Number: 330019-18
No Longer Available
Plastite Screw
Part #330019-18
This part is an OEM from DeWALT, Black & Decker, and Porter Cable for use in drills, sanders, and saws. The plastite screw attaches to the gear case. A torx screwdriver will be necessary during the installation of this part. It will require replacing if it becomes broken or stripped. Keep in mind this high-quality part is made of metal and is priced individually.
Chuck Key – Part Number: 330034-03
$21.90
Special Order
Chuck Key
Part #330034-03
This is an authentic manufacturer sourced replacement part designed for use with drills. This chuck key tightens and loosens the jaws of the chuck. This item is made out of metal and it is sold individually.