If your fridge doors aren’t sealing properly or you’re noticing cold air escaping, this front plate assembly might be the fix. Also called a mullion or flipper, it fits between the French doors to kee...
This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your...
This roller assembly supports smooth movement of racks, drawers, or drums during operation. Reduced friction improves ease of use and reduces wear. Replacing a worn roller restores quiet, smooth movement.
Weve got just the solution for your ice maker issues! This authentic LG Ice Maker Assembly can help bring your fridge back to its optimal performance. Its designed exclusively for certain LG refrigera...
This refrigerator door bin basket is designed to organize condiments, beverages, and small food items directly on the refrigerator door, helping restore lost storage when the original bin is worn or d...
This is a manufacturer-approved refrigerator door closure for your refrigerator. It is made of white plastic and measures approximately 3 inches by 2 inches. If your old closure is damaged, your refri...
This door gasket is used to seal the freezer door when closed.
$87.89
In Stock
Questions And Answers for 79574145910
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jennifer
February 18, 2025
How do you get to the water inlet valve so you can repair it?
For model number 79574145910
Hi Jennifer, Thank you for asking. The Water Inlet Valve is located on the back of the appliance. We were able to locate one of our How to Videos. The part and appliance might be slightly different; however, they will have the same basic steps for instillation. We hope this helps!
Was this helpful?
Thank you for voting!
Jennifer
February 18, 2025
The ice maker is freezing up
For model number 79574145910
Hi Jennifer,
Thank you for your question. If your ice maker is freezing over, you may have a clogged water line or a malfunctioning water inlet valve. If the water line is frozen try defrosting the refrigerator to see if this helps. If the water lines are fine, you will need to check the water inlet valve for continuity with a multimeter on the Rx1 setting to see if it is operating normally. You should receive a reading between 200 and 500 ohms. If you receive any other reading, you will need to replace the water inlet valve. We hope this helps!
Had to buy the entire door mullion because the spring broke, wasn't happy. Got the new part very quickly and it was a new replacement part number. Somewhat tentative. Took it out of the box and looked it over. No spring! Groan! Thought I got the wrong part. Flipped the bottom hinge and it snapped open, no need for a spring! Two screws, disconnect the wire harness, throw away the old, get new, connect the wire harness, connect hinges, put in two screws! Super easy. Watch the video for some pointers along the way.
The refrigerator had the above code and when I check on YouTube, it explained that the defrosting was not working properly. It was taking more than 80 minutes to defrost. I ordered the Temperature Sensor first and it was not the issue. I also ordered the Defrost Temperature fuse or the Thermistor. I had to defrost the refrigerator first by using a portable heater to get it done quickly. (See Youtube on how to get to the Defrosting Unit inside the freezer). The Thermistor was the wrong part. I called the Partselect and explained that the part with the heating element is one piece. (Heating Coil Thermistor or Heating Coil). By replacing that piece solved the Error Code issue. I listened to Youtube for the instructions on how to replace the Heater Coil. So if you see the Error Code dH F, you need to replace the Heating Coil, which comes in one piece and sits on the bottom of the Defrost Element.
