All Installation Instructions for Kenmore Refrigerator 79571322411

Icemaker flooded the storage container box for cubes. Then froze solid.

Ordered the Part after looking at the choices shown, once I inspected the unit. I then knew by looks what would fit. THEN (important) went on Utube asking for video instructions. They had it on the computer and it was just too easy. What took the longest was the removable of the frozen food items and the drawers in the Bottom Freezer section.
Perfect product, perfect instructions, perfect job and worked perfectly!

Fridge only 18 months old too!

Handyman wanted $457.00 to do the job! HA.

Parts Used:

Refrigerator Ice Maker Assembly

Irvin from Anaheim, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

8 of 15 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Ice maker quit working

Plug in the replacement ice maker to the socket in the frig, fit the back of the new ice maker into the slot to the rear, attach with 2 screws saved from removing old ice maker. Simple.

Parts Used:

Refrigerator Ice Maker Assembly

Richard from MINNEAPOLIS, MN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Freezer frost accumulation

After noting frost in freezer Right rail started to jam. Noted freezer door was closing crooked. Rail replacement resolved issue. It had been frosting up for some time so Rail must have been broken for a while. Check door seals they were not closing flush.

Parts Used:

Slide Rail - Right Side

Peter from Sewell, NJ
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

roller was missing in freezer upper drawer

easy, just lift the drawer and insert the roller assy.

Parts Used:

ROLLER ASSEMBLY

Bob from LIBERTY TWP, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

I took out the broken door bin and slid in the new one in about 1 minute!

Easy….the new bin slid in quite easily!!

Parts Used:

Refrigerator Door Bin

Mary L from DUBLIN, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

needed to replace broken ice maker

Take out 2 screws and unplug unit before removing. Plug-in new unit and screw in 2 screws. That's it.

Parts Used:

Refrigerator Ice Maker Assembly

John from WEST ROCKPORT, ME
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Unit kept beeping as if the freezer door was open

I popped the old switch out of place and then disconnected the wire harness from the switch with a pair of needle nose pliers. I then inserted the harness into the new switch and popped the switch into place. Super easy and fast.

Parts Used: