This refrigerator water filter replacement is for 2010 LG refrigerators that have either forward French doors or are the four-door dispensing models. This filter is designed to minimize impurities that can cause ill-tasting water or an unpleasant smell. It reduces sediment, dirt, rust, limescale, sand, and many other contaminants that can...Read more be harmful to your health and the life of your appliance. This filter should be replaced every 6 months or 200 gallons to ensure top quality performance.
To remove your unwanted filter, press the push button to open the filter cover (water may spill from the hole), pull out the old cartridge in a downward motion. To install the new filter, make it so the ears are in the horizontal position and push the new cartridge into the housing until it stops. Push the filter upward until it is secure. Click the cover to lock it in place. Run water for approximately 5 minutes to prep the filter for use, and discard water. Reset the “filter reset” button if applicable.
This crisper shelf glass is a genuine replacement component designed to fit over the crisper drawers in side-by-side refrigerators. Made from durable tempered glass it provides a stable and transparent surface for organizing food and beverages while enhancing visibility within the fresh food compartment. The shelf helps maximize usable sp...Read moreace and supports the weight of various items without bowing or cracking. It serves as a direct replacement for broken chipped or warped shelves restoring both function and appearance. Installation is simple and requires no tools. Always verify compatibility with your specific refrigerator model before replacement.
This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your screw is missing or broken, it may need to be replaced. There are multiple handle screws on your fridge, please consider ordering extra as ...Read morethey commonly wear at the same rate. This is about 1 inch long and metallic in color.
This part is the replacement water line or tube for your refrigerator. It is made of white plastic and is sold individually. This tube supplies water to the ice maker and water dispenser If your refrigerator is leaking, or it will not dispense water or ice, you may have a damaged water line. When you replace the water line, you may want t...Read moreo pick up a new water tube union as well. You can use a utility knife to cut the old water line where it is damaged and use the union to attach the new water line to the old one. This tubing is an OEM part from the manufacturer.
This 13-volt evaporator fan motor helps circulate air over the refrigerator coils. These coils will then convert the heat into cool air, which is then circulated from the freezer section to the fresh food section. If the fresh food section is too warm or the motor has failed, you will need to replace the evaporator fan motor. It is sugges...Read moreted to replace the thermistor when replacing the evaporator fan. The fan motor is in the freezer section of the refrigerator, and includes the harness and plug. Please remember to disconnect the power to the refrigerator before starting your repair. This is a genuine OEM part.
This valve helps your fridge deliver water to the ice maker and dispenser. If you’re not getting ice, the dispenser isn’t working, or you hear strange noises, this part might be the fix. It’s easy to install—just make sure it fits your model and turn off the power and water before replacing.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Karen - For model number 79571039010
June 30, 2021
Not dispensing ice, and items in the freezer are defrosting.
Hello Karen, Thank you for the question. We suggest testing the Defrost Sensor Assembly. It should read on a meter 30KO at 32°F, 24.1KO at 41°F, and 8.9KO at room temperature. We hope this helps!
Freezes In the winter but not in summer..garage refrigerator now
Hi Will, thank you for contacting us. We have found that there are evaporator coils and a circulating fan in the freezer zone of the refrigerator. Poor cooling can be a result of excessive frost development on the evaporating coils. Over time, frost accumulates over the coils and fan. When frost accumulates over the evaporator coils, they get insulated. Due to this, the circulating fan is unable to draw air over the frosted coils. We would recommend checking the frost buildup on the coils and ensuring proper ventilation of the refrigerator. If this is not the issue, you may need to check the evaporator fan motor, part number PS3523323, to fix the issue. We hope this solves your problem!
center door post on fridge goes back to the closed position when left door is opened are there springs in that center door post yhat need to be replaced
Hi Tony, thank you for contacting us. The springs are the part of mullion assembly, part number PS9865158. They do not come separately. You may need to replace it to fix the issue. We hope that helps!
ice maker not making ice. Already tried reset button.
Hello Anna, Thank you for your inquiry. It could be an issue with either the water inlet valve or the ice maker. We have included a link to our video on how to test the water inlet valve with a multimeter and how to test the ice maker. We hope this helps and if you need help placing an order for a part, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken water line
53 of 72 peoplefound this instruction helpful.
Debbie from FISHER, AR
Really Easy
15 - 30 mins
Screw drivers
Remove water filter and water filter holder. Removed cover on back of frig. Removed clip where water line connects to back of water filter. Took half inch wrench pushed in on water line lock to release line. Repeat at other end. Reverse steps to put on new line. Easy repair.
1. Shut off water to refrigerator. 2. Removed bottom sheet metal cover (6 screws). 3. Removed leaking water inlet valve assembly from refrigerator (1 screw). 4. Remove water inlet tube (loosen nut) and tube back to refrigerator (pull from water valve after remove cotter pin washer). 5. Detach two electrical wire harnesses. 6. Install new
... Read morewater inlet valve assembly to refrigerator (1 screw). 7. Replace both water tubes to water inlet assembly. 8. Re-attach both wiring harnesses. 9. Turn water to refrigerator on. 10. Check for leaks. 11. Re-attach bottom sheet cover (6 screws).
Read less
Was this helpful?
Thank you for voting!
Remove and replace light switch
45 of 91 peoplefound this instruction helpful.
Debbie from Waltham, MA
A Bit Difficult
30 - 60 mins
Pliers, Screw drivers
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator.
My Orders
