79568039211 Kenmore Refrigerator - Overview
Sections of the 79568039211
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Refrigerator Door Switch
PartSelect #: PS3529268
Manufacturer #: 6600JB1010A
This door switch is used in refrigerators. It is activated by the closing and opening of the door
$46.15
In Stock
Bushing
PartSelect #: PS3524960
Manufacturer #: 4984JJ3003A
This refrigerator door hinge bushing is a durable white plastic component that provides a smooth pivot point for the hinge pin, helping keep the door properly aligned and sealed. It is commonly used t...
$13.15
In Stock
CASE ASSEMBLY,CONTROL RE
PartSelect #: PS7786539
Manufacturer #: ABQ73946703
You're looking at the LG Case Assembly Control Refri, a key part made just for your LG refrigerator. This vital component is what lets you easily control and tweak both your fridge and freezer tempera...
$140.12
In Stock
HINGE ASSEMBLY,CENTER
PartSelect #: PS7788126
Manufacturer #: AEH73976901
Dealing with a faulty refrigerator door? Meet your solution'the Hinge Assembly, Center. Designed exclusively for your LG refrigerator, this genuine OEM piece acts like the backbone to your fridge door...
$61.55
Special Order
Common Symptoms of the 79568039211
[Viewing 2 of 2]Light not working
Fixed by
these parts
these parts
Show All
Door won’t open or close
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Remove and replace light switch
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator.
Parts Used:
-
Debbie from Waltham, MA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
45 of 89 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old bushing worn and broken
removed the upper freezer door to access screws to remove lower door.
laid bottom door on its side, removed bad bushing, put new bushing in, put bottom door back on refridge, put upper door back on fridge. Door worked easy as when new. good closure of door and story..Happy customer, and wife even happier.....thank you....
laid bottom door on its side, removed bad bushing, put new bushing in, put bottom door back on refridge, put upper door back on fridge. Door worked easy as when new. good closure of door and story..Happy customer, and wife even happier.....thank you....
Parts Used:
-
Jerry from CORSICANA, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
22 of 42 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bottom door dropped slightly and bottom hinge area rubbing on steel door support
removed 3 fasteners for top door and placed freezer door aside, then removed 3 more fasteners on bottom refrigerator door and place that aside. replaced bushing on lower door bracket and reversed the above procedure to reinstall doors.
Parts Used:
-
Louis from PHILADELPHIA, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set, Wrench set
12 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!