This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your...
Is your LG Refrigerators ice dispenser giving you trouble? It could be that the Dispenser Ice Chute Door DC Motor needs a replacement. This motor is an important gadget that allows the ice door on you...
This part must be installed by a licensed and trained LG technician that is able to perform a software update, which is required for the installation of this compressor. Part number CJT30000002 is nee...
When space becomes an issue in your LG refrigerator, our LG Door Shelf Bin is your answer. This is not just any bin ? it is a genuine LG part, made to slot perfectly into the door of your fridge. Desi...
We know how important it is to have chilled water on demand. That's why we're offering the LG Tank Water, a genuine LG replacement part that your fridge needs to keep your water cool and fresh. This i...
This capacitor provides the electrical boost needed for motors or components to start and run smoothly. Proper capacitance supports efficient operation and reduces strain on the system. Replacing a fa...
$99.15
In Stock
Questions And Answers for 79551839410
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
This repair was easy. The ice maker assembly is basically a plug and play unit that requires first removing the ice bucket as described inside the freezer door. Next, remove several screws the support the unit, then gently lifting the ice maker assembly out, just far enough to access the 2 electrical plugs that operate the unit. Carefully unplug the old unit and remove it. Next, plug the new unit and then reverse the disassembly process. I could have done this in 10 minutes had I not been careful not to break anything. No special tools are required.
Removed ice dispenser and display with small screwdriver from front of the fridge. Pried out the whole piece slowly. This exposed the motor that activates the chute. Plugged in the new motor before any removal to verify the motor was the problem. When it worked, removed old and installed new. 3 screws. Piece of cake.
