The Oven Bake Element is a black, metal part which supplies heat to the oven. This element is 19-1/2" wide x 18-1/2" long and has 3-1/2" inserts. It is rated as "Easy" to install by users, and attache...
This element has looped terminal ends and comes with a black medallion center. This element is a genuine OEM replacement part, has looped terminal ends, comes with a black medallion center, and fits m...
This is used as the "floor" of the oven cabinet.
Note: Does not come with rivets or screws. Must be purchased locally.
$177.54
In Stock
Questions And Answers for 79094143310
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Billy
February 4, 2024
The red light showing the burner is on does not go off but the switch is off and not producing heat
For model number 79094143310
Hello Billy, thank you for reaching out. According to our research, the issue is most probably with the Indicator Light and you may need to replace it to fix the issue. The part number is PS436960. Glad to be of assistance!
The HE lights come on for all burners even though only one was used. After a while they all go out.
For model number 79094143310
Hello David, thank you for your inquiry. We believe your range is having this problem because of the faulty control board, part number PS8689401. We would recommend replacing it to fix the issue. We hope that helps!
The stove/oven turns off while cooking. This has been since i used the self clean option. I purchased it 3 years ago.
For model number 79094143310
Hi Kathleen,
Thank you for contacting us. The self-clean option uses high heat when it is in use and the heat may have damaged some of the parts inside the oven. The parts that may have been damaged are the wiring, the oven temperature sensor, the electronic control board and the elements. You will need to check each part to see which one is causing the issue. We hope this helps! Good luck with the repair!
while plugged in and all top burners turned off, element lights on, 3 burners wont shut off and 1 will not turn on at all
For model number 79094143310
Hello Mike, thank you for reaching out. The problem seems to be with the Spark Ignition Switch and Harness and you may need to replace it, the part number is PS12585463. If you require assistance placing an order, please contact customer service. We hope that helps!
The top oven will broil , but when you set to a temp it will heat up to temp and then cool back down to a lower temp , the fan does not run when the top oven is trying to be used . Bottom works fine I have replaced the sensor and both boards still does the same thing
For model number 79094143310
Hi Jerry, thank you for reaching out. Based on our understanding, the issue is with the terminal block, part number PS2333392. We would recommend checking the wire connections at the terminal block. If the wire connections are not loose, then you may need to replace the terminal block to fix the issue. Glad to be of assistance!
1. Removed two screws, pulled out the element, voltage tested the element and determined it was an open circuit (bad element). 2. Ordered the part from partselect.com 3. Disconnected element, connected the new one, and screwed it back in.
Shut off circuit breaker to stove and collected the tool from the basement. Turned on flashlight. Unscrewed the two hex nuts from the old element/back of the oven. Slid the old element prongs out of the back, exposing the connecting wires. Pulled the connecting wires off of the old element, carefully, so that the connections wouldn't come off of the wires. Threw the old element pieces in the garbage. Connected the new element to the connecting wires and re-fastened the hex nuts. My husband had wanted to call the repair man, but it didn't look too difficult, so I decided to try it on my own. Boy was he surprised when I fixed it, and for a fraction of the cost of hiring a repairman! Ladies, we can do this ourselves!!! :) Thank you for being there for us to order our part from, Parts Select, we had our new part in less than 24 hours, so the shipping was blazing fast!!! Keep up the good work!!! :)