79090133701 Kenmore Range - Overview

Diagrams for 79090133701

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven Bake Element – Part Number: 316075103
$47.95
In Stock
Oven Bake Element
★★★★★
★★★★★
(384)
Part #316075103
The Oven Bake Element is a black, metal part which supplies heat to the oven. This element is 19-1/2" wide x 18-1/2" long and has 3-1/2" inserts. It is rated as "Easy" to install by users, and attaches to the bottom of the oven. If you notice visible damage, or that your oven is not receiving heat properly then it may be a problem with this part. Check your model number and user manual to see if this is the right part for you. It is important for you to disconnect your appliance from the power source before performing this repair. After disconnecting your appliance, remove the two screws/nuts connecting the old element, pull it out, and discard if faulty. Simply connect the new element prongs where the old element fit, and screw it back in. You may need a flashlight when making this repair.
Terminal Block Kit – Part Number: 5303935058
$20.88
In Stock
Terminal Block Kit
★★★★★
★★★★★
(45)
Part #5303935058
This surface burner terminal block kit comes with interchangeable mounting brackets, terminal box, ceramic wire nuts, heat shrink protective tubing and wires.
Infinite Burner Switch - Large Element – Part Number: 316436001
$56.61
In Stock
Infinite Burner Switch - Large Element
★★★★★
★★★★★
(98)
Part #316436001
This surface burner switch controls the stove top 8-inch surface burner temperature. This switch is 240-volt, 2100-2600 watt, and 8.8-10.8 amp. If your element is not defective but will not heat, you may need to replace the switch. This burner switch is a genuine OEM part. It is recommended to disconnect the power to your range before you start your repair.
Temperature Sensor – Part Number: 316490000
$83.52
In Stock
Temperature Sensor
★★★★★
★★★★★
(49)
Part #316490000
The temperature sensor, also known as an oven probe, detects the temperature within the oven cavity. This temperature sensor is 9 inches in length and is a genuine OEM part. If your oven is too hot, not heating evenly, or has little to no heat when baking, you may need to replace the temperature sensor. Please make sure to disconnect the power to your range before starting your repair.
Surface Element - 8 Inch - 2600W – Part Number: 316442301
$51.65
In Stock
Surface Element - 8 Inch - 2600W
★★★★★
★★★★★
(23)
Part #316442301
This surface burner element is eight inches in diameter. It has five turns, 2600 watts and looped terminal ends. The element provides heat to the cooking surface on your range. If your element is not heating, you may need to replace this part. Please make sure the power has been disconnected and the element is turned off and had time to cool before starting your repair. The element is a genuine OEM part. It is sold individually.
Handle Mounting Screw – Part Number: 316433300
$32.01
In Stock
Handle Mounting Screw
★★★★★
★★★★★
(18)
Part #316433300
This handle mounting screw works with your oven or range, and bolts the door handle to the door. It is approximately 2 inches in length and is an OEM part sourced directly from the manufacturer. If your oven door will not close or your door handle is loose or disconnected, you may need to tighten or replace the handle mounting screw.
Drip Bowl - 8 Inch – Part Number: A316222301
$21.12
In Stock
Drip Bowl - 8 Inch
★★★★★
★★★★★
(15)
Part #A316222301
This is an 8-inch drip bowl for your range or cooktop. It is made of porcelain and is black in color. Place the drip pan under your burner to catch food that may drip or spill while you cook. It is 10 inches in total diameter. Be sure to wait until drip pan and burner are cool to the touch before completing this replacement.
Light Bulb – Part Number: 316538904
$35.95
In Stock
Light Bulb
★★★★★
★★★★★
(9)
Part #316538904
This 40-watt appliance light bulb is a reliable replacement for use in select ranges, refrigerators, freezers, and microwaves. It provides bright, consistent lighting to help you see clearly inside your appliance. Installation is simple—just unscrew the old bulb and replace it with the new one. If the existing bulb is broken, disconnect power and use needle-nose pliers to safely remove the remaining base. Sold individually, this bulb is a commonly replaced part—consider keeping a spare on hand.
Drip Bowl - 6 Inch – Part Number: A316222201
$17.55
In Stock
Drip Bowl - 6 Inch
Part #A316222201
This drip bowl is a genuine OEM replacement part for your stovetop. It is black in color, made of porcelain, and six inches in diameter. To replace the drip pan, you simply need to remove the burner element. It may be held in place by a spring-loaded mechanism. Pop out the burner, remove the old drip pan and clean up any cooking residue, and replace with the new drip pan.
6-Inch Coil Burner Element – Part Number: 318372211
$43.51
In Stock
6-Inch Coil Burner Element
★★★★★
★★★★★
(10)
Part #318372211
This element has looped terminal ends and comes with a black medallion center. This element is a genuine OEM replacement part, has looped terminal ends, comes with a black medallion center, and fits most electric ranges. All burners are made of a heating wire that produces heat from electricity. Remove the non-functional burner element from the terminal block (or receptacle). Use a multi-meter to check for continuity. Check the end of the terminals for corrosion or heat damage. If there is corrosion or heat damage, replace the whole terminal block or receptacle at the same time you replace the damaged coil. Before you start this repair, make sure that the element is turned off and cool to the touch.
LENS – Part Number: 5304524341
$34.95
In Stock
LENS
★★★★★
★★★★★
(14)
Part #5304524341
This lens covers the interior oven light bulb.
Infinite Burner Switch - Small Element - 240V – Part Number: 316436000
$96.98
In Stock
Infinite Burner Switch - Small Element - 240V
★★★★★
★★★★★
(11)
Part #316436000
This switch controls the stove top surface burner.

Manuals & Care Guides for 79090133701

Click to download

Common Symptoms of the 79090133701

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven woudn't heat
1298 of 1511 people found this instruction helpful.
  • David from Shawnee, KS
  • Really Easy
  • Less than 15 mins
  • Screw drivers
1. Removed two screws, pulled out the element, voltage tested the element and determined it was an open circuit (bad element).
2. Ordered the part from partselect.com
3. Disconnected element, connected the new one, and screwed it back in.
Was this helpful?
Thank you for voting!
Element cracked in two pieces
821 of 928 people found this instruction helpful.
  • Michael from Green Bay, WI
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Shut off circuit breaker to stove and collected the tool from the basement. Turned on flashlight. Unscrewed the two hex nuts from the old element/back of the oven. Slid the old element prongs out of the back, exposing the connecting wires. Pulled the connecting wires off of the old element, carefully, so that the connections wouldn 't come off of the wires. Threw the old element pieces in the garbage. Connected the new element to the connecting wires and re-fastened the hex nuts. My husband had wanted to call the repair man, but it didn't look too difficult, so I decided to try it on my own. Boy was he surprised when I fixed it, and for a fraction of the cost of hiring a repairman! Ladies, we can do this ourselves!!! :) Thank you for being there for us to order our part from, Parts Select, we had our new part in less than 24 hours, so the shipping was blazing fast!!! Keep up the good work!!! :)
Was this helpful?
Thank you for voting!
oven did not heat
438 of 479 people found this instruction helpful.
  • jack from chambersburg, PA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
removed screws pulled element out. removed wire from old element replaced with new element.very easy
Was this helpful?
Thank you for voting!