This light bulb is for microwaves.
Light bulb illuminates the surface below the microwave or the interior of the microwave.
Because high-voltage capacitors in a microwave can retain a lethal e...
$32.79
In Stock
Order within the next 12 hrs and your part ships today!
Sold individually. This grease filter is for microwaves.
Grease filter traps grease from the exhaust air.
Follow the instructions in the owner's manual when installing this part.
$89.32
In Stock
Order within the next 12 hrs and your part ships today!
This motor rotates the glass turntable in the microwave and accepts a D- shaped shaft.
$112.69
In Stock
Order within the next 12 hrs and your part ships today!
Questions And Answers for 79080323310
Ask our experts a question about this model and we'll get back to you as soon as possible!
9 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Judy
January 15, 2020
I need a new bulb but don't know where the lightbulb is in this microwave. Is there a clearer blueprint?
For model number 79080323310
Hello and thank you for writing.
For your convenience, we have attached the link to your service manual. We hope this helps. Good luck with your repair.
https://www.manualslib.com/products/Kenmore-79080323310-3158972.html
The light bulb is part # PS1765541.
On the inside of my microwave door is an adhesive shield (perforated) that is coming off the glass on the door can i take it off or does it need replaced ? If so where can i get a new piece?
For model number 79080323310
Hello and thank you for writing.
This is a door mash but it is not available for this unit, you would have to replace the whole door assembly PS8760391. We hope this helps. Please contact us anytime if you require further assistance.
If diode is bad would this cause the inline fuse to blow.
For model number 79080323310
Hello and thank you for writing.
There are other parts that could cause this, but certainly, the diode could be at fault here you should start by changing the diode PS12071314 since you know this part is bad. We hope this helps. Please contact us anytime if you require further assistance.
Door came off and now microwave has no power. What should I do?
For model number 79080323310
Hello Charlie, thank you for the question. If you have installed the microwave door and the appliance is not working, then we recommend you check these parts: the fuse, part number PS12071294, the door switch, part number PS12071302, the door latch, part number PS2582995, and the capacitor, part number PS12071296. Inspect these parts for damage, and replace the damaged component so your microwave starts working. If you require assistance to place an order, please contact customer service. We hope that helps!
My microwave light is on, the time is lit up, and it makes a sound like it’s working, but it dies not get hot or warm at all. What might be the issue?
Thank you.
For model number 79080323310
Hello Mary, thank you for contacting us. We would recommend checking the door switch, part number PS12071302, the thermostat, part number PS12071309, and the diode, part number PS12071314. These are the most likely culprits of the problem. The issue can also be related to a shorted magnetron, part number PS12705729. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Remove vent cover then remove touch screen control panel. When you remove control panel take photo of where everything is plugged in then unplug and remove control panel. 3 door switches located next to door in a plastic chassis. Test each switch with current tester. Remove the bad switch and replace with the new one. You tube DIY helped.
First thing I dir was search YouTube for any related videos and found this one https://www.youtube.com/watch?v=uHj4H9Fdxrc, it was the exact problem my microwave was exhibiting. Once I verified the problem by troubleshooting, I removed the part and verified that the switches were working fine, the door latch assembly showed signs of wear which was the cause of the problem. After receiving the replacement part I installed it, verified that power was restored to the unit and reassembled the microwave, works fine, hope it lasts a long time!
