Also known as Probe. The quick connect on this part may be different than your original part. If it doesn't fit, you have to cut off the quick connect and wire together with porcelain wire nuts.
This 40-watt appliance light bulb is a reliable replacement for use in select ranges, refrigerators, freezers, and microwaves. It provides bright, consistent lighting to help you see clearly inside yo...
This broil element is found on the roof of the oven and heats food. The most common reasons you would need to replace this part is due to the oven not giving off enough heat, not turning on, or not ba...
This convection element generates heat to support even air circulation and consistent cooking performance. Its high-output design allows for efficient temperature recovery and uniform results. Replaci...
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joan
November 22, 2023
One burner clicking and starting once in a while. Changed the electrode
( not the problem)- Could it be the switch module?
For model number 79075503202
Hello Joan, thank you for your inquiry. Based on the description that you have provided, we would recommend checking the spark module, part number PS11770793, to fix the issue. We hope this solves your problem!
How do I access the control panel to clean back side of panel glass?
For model number 79075503202
Hello Tom, Thank you for contacting us. You would need to remove the back panel on the back of the stove. We have provided a link to one of our videos on accessing the control board, which also shows how to access the control panel. We hope this helps you.
2 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Thomas
17 days ago
The large lower drawer (below the oven) has defective drawer slides (ball bearing are falling out- black plastic retainer clip is damaged. I need to replace the slides that attach to the oven frame.
For model number 79075503202
Hi Thomas, thank you for contacting us. The drawer outer glides for your model are part number PS977459. They are sold individually. The inner drawer glide for the left side is part number PS1152401, and for the right side, it is part number PS1152400. We hope that helps!
Hello, I am looking for 2 racks for the side oven on this Kenmore Elite dual fuel range. Also, I need drawer glides for the bottom drawer and an igniter for one of the burners
For model number 79075503202
Hello Kelly, thanks for contacting us. With reference to your model number after research we have found the compatible parts that you are looking for is PS725729 for the ignitor, PS1560592 for the rack, PS1152401 for the left glide for drawer, and PS1152400 for the right side glide. We hope this will solve your problem. Thanks.
The repair was simple; first I removed the 2 screws from the old element and disconnected the wires and then I inserted the new element reconnected the wires and replaced the screws . The repair was easy and took less that 15 min. The oven works as good as new and I saved alot of money by doing it myself.
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with two screws; the back of the oven will need to be removed to unplug. Reverse removal procedure and turn the power back on to the stove.
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
