This 8-inch range surface element is designed to provide consistent and safe heating for stovetop cooking. It features a built-in temperature limiter that helps prevent overheating by temporarily shut...
Cook with confidence using this surface element switch for your electric range. It lets you adjust the heat on your large burner for perfect cooking results every time. Designed for an 8-inch element,...
Replace a faulty or worn heating coil with this 6-inch surface element for electric ranges. It features a temperature-limiting safety sensor that automatically shuts off heat when pan temperatures exc...
This infinite control switch regulates power to a surface burner, allowing smooth and adjustable heat control. Reliable switching improves cooking accuracy and safety. Replacing a faulty switch helps ...
First I unplugged the stove.Removed the upper control panel back (10 phillips screws). Removed the plastic dial( pulls straight off). Removed the 2 screws behind the dial that is holding the switch in the control panel. Took one wire at a time off the old switch and put them on the new switch according to each electrical spade marking. L1, L2, H1, H2 and P. Installed the new switch in the control panel securing it with the 2 screws. Installed the dial, installed the upper back panel using the old screws. Plugged the stove back in and tested it. Note: My new switches shaft was 1/8 of an inch longer so it does put the dial a little further away from the control panel. Wife says: It's OK, don't worry about it.
I simply removed the old drip pans and inserted the new ones which matched and fit perfectly. I'm glad I found you on line. Your service was fast and the whole transaction was easy!! Thanks.