7756 LG Refrigerator - Overview

Models starting with 7756

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door Stopper – Part Number: 4620JJ2009A
$15.35
In Stock
Plastic Tube - 5/16 Inch – Part Number: MJU62070602
$32.95
In Stock
Refrigerator Door Switch – Part Number: 6600JB1010A
$46.15
In Stock
Refrigerator Door Switch
★★★★★
★★★★★
(2)
Part #6600JB1010A
This door switch is used in refrigerators. It is activated by the closing and opening of the door
Ice Water Tube Assembly – Part Number: AJR56656503
$40.65
In Stock
Ice Water Tube Assembly
Part #AJR56656503
Push Button Switch – Part Number: 6600JB3007E
$47.07
In Stock
Push Button Switch
★★★★★
★★★★★
(1)
Part #6600JB3007E
This is a genuine replacement switch. It is a push button style switch that is designed for use in your refrigerator. When the door of your appliance is opened the switch is released, and the light comes on. When you close the door the switch is pressed in, and the light turns off. You may need a putty knife to remove your old switch.
Refrigerator Water Filter LT600P – Part Number: 5231JA2006F
$77.99
In Stock
Refrigerator Water Filter LT600P
★★★★★
★★★★★
(1)
Part #5231JA2006F
This OEM filter measures 2.5 inches deep, 12.5 inches high, 5 inches wide and roughly 1.5 lbs. It is recommended to replace this filter every six months or 300 gallons, whichever comes first. If you notice an unpleasant taste in your water or it suddenly dispenses much slower, these are also common indications that a replacement is necessary. It filters sediment, dirt, rust, cysts, lead, mercury, and more. For proper use, operating pressure should be 30-120 PS, operating temperature should be 33-100 degrees Fahrenheit, with a flow rate of 0.5 gallons per minute. Installation is quick and easy and does not require the use of tools.
Door Shelf Bin – Part Number: AAP73871501
$63.75
In Stock
Door Shelf Bin
Part #AAP73871501
Sold individually.
Plastic Tube – Part Number: 5210JA3005E
$26.35
In Stock
Plastic Tube
Part #5210JA3005E
This part is the replacement water line or tube for your refrigerator. It is made of white plastic and is sold individually. This tube supplies water to the ice maker and water dispenser If your refrigerator is leaking, or it will not dispense water or ice, you may have a damaged water line. When you replace the water line, you may want to pick up a new water tube union as well. You can use a utility knife to cut the old water line where it is damaged and use the union to attach the new water line to the old one. This tubing is an OEM part from the manufacturer.
Compressor Start Relay – Part Number: 6749C-0014E
$48.35
In Stock
Compressor Start Relay
★★★★★
★★★★★
(1)
Part #6749C-0014E
This compressor start relay and thermistor assembly helps start the refrigerator's compressor and protects it from overheating during operation. It provides the electrical boost needed to get the compressor running, which is essential for maintaining proper cooling inside the refrigerator. If the refrigerator is not cooling properly, the compressor is not starting, or you hear repeated clicking noises, a faulty relay assembly may be the cause. Replacing this part can help restore reliable compressor operation and keep the refrigerator cooling as intended.
Primary Water Valve - Single Coil – Part Number: MJX41178908
$65.95
In Stock
Primary Water Valve - Single Coil
★★★★★
★★★★★
(4)
Part #MJX41178908
This single-coil water inlet valve is designed for use in refrigerators and controls the flow of water to both the ice maker and water dispenser. It plays a critical role in maintaining consistent water delivery ensuring proper ice production and dispenser functionality. The valve helps regulate pressure and timing optimizing system performance and preventing issues such as slow ice output weak water flow or interruptions in dispensing. Common symptoms of a failing valve include no water dispensing ice maker failure or leaks near the dispenser area. Installation requires disconnecting the appliance from power and water supply and verifying compatibility with your specific model before replacement.
Evaporator Fan Motor – Part Number: 4681JB1027C
$216.10
In Stock
Evaporator Fan Motor
★★★★★
★★★★★
(1)
Part #4681JB1027C
This 13-volt evaporator fan motor helps circulate air over the refrigerator coils. These coils will then convert the heat into cool air, which is then circulated from the freezer section to the fresh food section. If the fresh food section is too warm or the motor has failed, you will need to replace the evaporator fan motor. It is suggested to replace the thermistor when replacing the evaporator fan. The fan motor is in the freezer section of the refrigerator, and includes the harness and plug. Please remember to disconnect the power to the refrigerator before starting your repair. This is a genuine OEM part.
Connector,Tube – Part Number: 4932JA3009A
$20.85
Special Order
Connector,Tube
Part #4932JA3009A

Exact Part matches for your search term

CAP – Part Number: 7756
No Longer Available
CAP
This part number matches the current model number 7756
Part #7756
Hndl Uppr Right Hand – Part Number: 7756
No Longer Available
Hndl Uppr Right Hand
This part number matches the current model number 7756
Part #7756

Common Symptoms of models starting with 7756

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken water line
53 of 72 people found this instruction helpful.
  • Debbie from FISHER, AR
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Remove water filter and water filter holder. Removed cover on back of frig. Removed clip where water line connects to back of water filter. Took half inch wrench pushed in on water line lock to release line. Repeat at other end. Reverse steps to put on new line. Easy repair.
Was this helpful?
Thank you for voting!
Remove and replace light switch
45 of 91 people found this instruction helpful.
  • Debbie from Waltham, MA
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator.
Was this helpful?
Thank you for voting!
Replace Thermistor in back of freezer
18 of 25 people found this instruction helpful.
  • Scott from JUPITER, FL
  • Easy
  • 1- 2 hours
  • Pliers, Screw drivers
Turn off power, remove upper and lower drawers (may need to open upper refrigerator doors to remove large freezer bin,) remove drawer supports (upper and lower), remove rear freezer panel (trick is to loosen 4 screws on fan bumpout to get the panel to come free from the freezer side wall), test thermistor with multimeter (should have cont inuity or near zero resistance across 2 orange fuse wires) before cutting zip ties, cut zip ties holding Thermistor in place, remove old Thermistor, install new Thermistor, install new zip ties, replace rear freezer panel, install upper and lower drawer supports, install drawers, turn on power, should be fixed if error code doesn't return after 6 hours.
Was this helpful?
Thank you for voting!