7712-8002) Bosch Dishwasher - Overview

Diagrams for 7712-8002)

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Upper Rack Roller – Part Number: 10032849
$18.30
In Stock
Upper Rack Roller
★★★★★
★★★★★
(43)
Part #10032849
This wheel is a dishwasher rack wheel designed for the upper rack of your appliance. The roller wheel is approximately 1.25 inches in diameters and includes the brushing you need for installation. It simply clips right on to the rack frame. After the wheel are attached to the side of the dishrack and are placed into the slides on either side of the appliance. Dishrack roller wheels allow the upper rack in a dishwasher to glide in and out of the appliance with ease. Due to the fact the roller wheel is made of plastic they tend to wear out after a period of time, also they can break. We do recommend you replace these rack wheels in pairs as they often wear out at the same rate. These wheels are sold individually.
Lower Rack Wheel with Clip – Part Number: 00165314
$25.87
In Stock
Water Inlet Valve – Part Number: 00425458
$104.34
In Stock
Water Inlet Valve
★★★★★
★★★★★
(18)
Part #00425458
If your dishwasher isn’t filling with water, running dry, or leaking, the water inlet valve might be the issue. This part controls how much water flows into your dishwasher during each cycle. It’s designed to open and close at the right times, keeping everything running smoothly. When it wears out, you might notice poor cleaning or puddles under your appliance. Swapping it out is a smart fix—and with a little guidance from your owner's manual, it’s usually a straightforward job.
LID – Part Number: 00166623
$25.99
In Stock
Check Valve – Part Number: 00165262
$24.16
In Stock
Dishwasher Tripping Device – Part Number: 00166630
$29.28
In Stock
Dishwasher Tripping Device
★★★★★
★★★★★
(4)
Part #00166630
Ensure proper detergent release during wash cycles with this genuine latch kit, designed to open the detergent cup at the right time and prevent premature opening. The kit includes a latch, spring, and seal, providing a complete solution for restoring smooth operation. Common signs that replacement is needed include the detergent cup popping open unexpectedly, difficulty closing, or detergent leakage. Installing this part helps maintain optimal cleaning performance and prevents wash cycle interruptions.
Drain Hose – Part Number: 00298564
$55.67
In Stock
CUTLERY BASKET – Part Number: 00093046
$78.79
In Stock
CUTLERY BASKET
★★★★★
★★★★★
(4)
Part #00093046
Keep your silverware neat and clean with this Bosch dishwasher basket. It fits in the lower rack and has separate sections for utensils plus a handy handle for easy removal. Made from sturdy plastic, it’s about 9.9" x 5.9" x 8" and works with many Bosch, Thermador, and Gaggenau models. Check your model number to confirm.
Micro Filter – Part Number: 00615079
$87.15
In Stock
LID – Part Number: 00166621
$78.79
In Stock
LID
★★★★★
★★★★★
(3)
Part #00166621
This dishwasher detergent dispenser cover helps seal the detergent compartment and ensures detergent is released at the correct point during the wash cycle. Designed with an integrated gasket for a secure fit, it replaces lids that are cracked, leaking, or no longer latching properly. Installing a new cover can resolve issues such as detergent not dispensing, leaks from the dispenser, or a broken lid, helping restore proper cleaning performance and reliable dishwasher operation.
Dishwasher Door Hinge Lever Bearing – Part Number: 00165296
$31.23
In Stock
Dishwasher Door Hinge Lever Bearing
★★★★★
★★★★★
(1)
Part #00165296
This door hinge lever bearing is for dishwashers. Door hinge lever bearing allows the door hinge lever to move smoothly.

Common Symptoms of the 7712-8002)

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The plastic clip on the roller broke
26 of 38 people found this instruction helpful.
  • Catherine from AMHERST, NY
  • Very Easy
  • Less than 15 mins
We let this go for a shameful amount of time before I decided I could probably fix it. The roller broke so you could only pull it out about halfway or it would come off the track. I looked up the part, and bought it. Actually bought two in case it happened again. When I arrived I looked at how it was put together on the other side and t hen just basically pushed it onto the rod and it was fixed. I am ashamed it took so long to do it. Never be afraid to try it yourself. It was a total of $10 shipped to fix it.
Was this helpful?
Thank you for voting!
dishwasher not draining
14 of 20 people found this instruction helpful.
  • Bruce from MOUNT VERNON, WA
  • Very Easy
  • Less than 15 mins
  • Screw drivers
I used a wet vac to remove the water from the dishwasher. remove cover and filter/strainer from bottom of dishwasher. remove screw which allows you to lift the plastic piece to access check valve. Original check valve looked like new , I installed new check valve re installed parts . Job done and issue resolved .
Was this helpful?
Thank you for voting!
Replacing Dishwasher door gasket
9 of 10 people found this instruction helpful.
  • John from DOWNINGTOWN, PA
  • A Bit Difficult
  • 1- 2 hours
Watched a 5 min YouTube video and followed directions. Could not have performed the project without the video help. Had to remove dishwasher from under the counter to remove door from dishwasher. Glad I could perform task, would have been a costly repair. One appliance repair company would not do the job.
Was this helpful?
Thank you for voting!