77-4992-00 (01) Tappan Range - Overview
Sections of the 77-4992-00
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".
Fluorescent Light Bulb
PartSelect #: PS435838
Manufacturer #: 3131275
This fluorescent bulb illuminates the control panel.
No Longer Available
Door Handle Repair Kit
PartSelect #: PS470059
Manufacturer #: 5303934042
This kit does not include the latch strike.
$175.28
Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broiler element burnt out. It literally broke off & emitted white-hot sparks.
NOTE: My Tappan oven (model 77 4972 23) is 33 years old & it was difficult to find the correct part number for the broiler element. Part No. 5303051140 (PS 453940) costs only $18.00 but won't work because the plate that screws onto the oven is only 1.5 inches wide and it needs to be 3.75 inches wide to fit. The part number that works (and costs $89.00) is 220T017P02 (PS429510).
First thing I did was turn off power to the range at the circuit breaker. The repair was generally easy with the exception that 1 screw holding the broiler element support was "welded" into the oven ceiling. I stripped the screw trying to get it out. Fortunately, I had a special tool that allows one to grip the outer edge of the screw while turning it --- and that's how I got it apart. Once the broiler element support was off, I removed 2 screws from the 3.75 inch plate holding the broiler element itself to the oven wall and carefully pulled the broiler element out from the oven wall and detached the wire clips connecting the wires to the broiler element. I reattached the clips onto the new element and installed the new element back into the oven wall. I then reattached the broiler element support using a another screw (because I decimated the original one). I then turned the circuit breaker back on and turned the broiler on. Voila. My broiler works again! Special thanks to the people at this site who were very helpful in seeing to it I got the correct broiler element. The original ordered broiler element was delivered to the wrong address. The folks at this site sent me another one. To make a long story short, they saw to it I got the correct part. I highly recommend this site based on my experience with them. GREAT customer service!!
First thing I did was turn off power to the range at the circuit breaker. The repair was generally easy with the exception that 1 screw holding the broiler element support was "welded" into the oven ceiling. I stripped the screw trying to get it out. Fortunately, I had a special tool that allows one to grip the outer edge of the screw while turning it --- and that's how I got it apart. Once the broiler element support was off, I removed 2 screws from the 3.75 inch plate holding the broiler element itself to the oven wall and carefully pulled the broiler element out from the oven wall and detached the wire clips connecting the wires to the broiler element. I reattached the clips onto the new element and installed the new element back into the oven wall. I then reattached the broiler element support using a another screw (because I decimated the original one). I then turned the circuit breaker back on and turned the broiler on. Voila. My broiler works again! Special thanks to the people at this site who were very helpful in seeing to it I got the correct broiler element. The original ordered broiler element was delivered to the wrong address. The folks at this site sent me another one. To make a long story short, they saw to it I got the correct part. I highly recommend this site based on my experience with them. GREAT customer service!!
Parts Used:
-
MG from ENCINITAS, CA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
5 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The neon tube over the stove top went out
-
Gunther from Columbia, SC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
8 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The wall oven in our family home since 1963(replaced in the 80’s) wasn’t working. Since I’m the family baker and had returned to live with my sister, it was IMPORTANT/chuckle.
The repair was simple. The part just got plugged in and installed.
Phew, and it works!
I’d found your company when the front burner of the rangetop wasn’t working.
Even though it took awhile to arrive, the wait was kindly explained by a call to customer service. She was very reassuring that it was a back order and they’d let me know when it was shipped. They did, it arrived and I’m very pleased.
Thank you for your excellent service.
Phew, and it works!
I’d found your company when the front burner of the rangetop wasn’t working.
Even though it took awhile to arrive, the wait was kindly explained by a call to customer service. She was very reassuring that it was a back order and they’d let me know when it was shipped. They did, it arrived and I’m very pleased.
Thank you for your excellent service.
Parts Used:
-
Madeline from Champaign, IL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!