77-4972-00 (09) Tappan Range - Overview

Diagrams for 77-4972-00

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Terminal Block Kit – Part Number: 5303935058
$20.88
In Stock
Terminal Block Kit
★★★★★
★★★★★
(45)
Part #5303935058
This surface burner terminal block kit comes with interchangeable mounting brackets, terminal box, ceramic wire nuts, heat shrink protective tubing and wires.
Drip Bowl - 8" – Part Number: 316048413
$19.75
In Stock
Drip Bowl - 8"
★★★★★
★★★★★
(18)
Part #316048413
This drip bowl is located beneath the element and catches any spills. It is sold individually and has a diameter of approximately 10 inches.
Chrome Drip Bowl - 6" – Part Number: 316048414
$18.65
In Stock
Chrome Drip Bowl - 6"
★★★★★
★★★★★
(20)
Part #316048414
This drip bowl is sold individually. This part is located beneath the element and catches spills from cooking.
Surface Element - 8 Inch - 2600W – Part Number: 316442301
$51.65
In Stock
Surface Element - 8 Inch - 2600W
★★★★★
★★★★★
(23)
Part #316442301
This surface burner element is eight inches in diameter. It has five turns, 2600 watts and looped terminal ends. The element provides heat to the cooking surface on your range. If your element is not heating, you may need to replace this part. Please make sure the power has been disconnected and the element is turned off and had time to cool before starting your repair. The element is a genuine OEM part. It is sold individually.
Main Terminal Block Kit – Part Number: 5304409888
$48.78
In Stock
Main Terminal Block Kit
★★★★★
★★★★★
(11)
Part #5304409888
Terminal blocks (also called terminal boards or strips) provide a convenient means of connecting individual electrical wires.
6-Inch Coil Burner Element – Part Number: 318372211
$43.51
In Stock
6-Inch Coil Burner Element
★★★★★
★★★★★
(10)
Part #318372211
This element has looped terminal ends and comes with a black medallion center. This element is a genuine OEM replacement part, has looped terminal ends, comes with a black medallion center, and fits most electric ranges. All burners are made of a heating wire that produces heat from electricity. Remove the non-functional burner element from the terminal block (or receptacle). Use a multi-meter to check for continuity. Check the end of the terminals for corrosion or heat damage. If there is corrosion or heat damage, replace the whole terminal block or receptacle at the same time you replace the damaged coil. Before you start this repair, make sure that the element is turned off and cool to the touch.
Burner Switch Kit – Part Number: 5303935086
$72.50
In Stock
Burner Switch Kit
★★★★★
★★★★★
(8)
Part #5303935086
This switch controls the stove top surface burner.
2 Pack Light Bulb - 40W – Part Number: 5304490731
$47.00
Special Order
2 Pack Light Bulb - 40W
Part #5304490731
Fluorescent Light Bulb – Part Number: 3131275
No Longer Available
Fluorescent Light Bulb
Part #3131275
This fluorescent bulb illuminates the control panel.
4 Wire Cord - 4ft - 50amp – Part Number: 5308819008
$63.75
Special Order
4 Wire Cord - 4ft - 50amp
Part #5308819008
Broil Element - 3000W 240V – Part Number: 220T017P02
No Longer Available
Broil Element - 3000W 240V
Part #220T017P02
Door Hinge - Left Side – Part Number: 5303205939
No Longer Available
Door Hinge - Left Side
Part #5303205939

Common Symptoms of the 77-4972-00

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Cord was not tightened enough by delivery crew.
109 of 174 people found this instruction helpful.
  • Timothy from Spring Valley, AL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools neede d are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
Was this helpful?
Thank you for voting!
burner shorted out
61 of 75 people found this instruction helpful.
  • David from Encinitas, CA
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
I followed the directions by clipping wires to old burner socket, splicing the wires to new terminal block, screwing down new "block bracket," and plugging in new burner.
Was this helpful?
Thank you for voting!
Old pans/bowls were corroded
48 of 55 people found this instruction helpful.
  • John from Nisswa, MN
  • Really Easy
  • Less than 15 mins
Very easy---simply unplug the burners, remove the old pans and replace with the new ones

I was extremely pleased with the easy ordering and prompt delivery of parts that actually fit as they should!
Was this helpful?
Thank you for voting!