77-4957-45-08 Tappan Range - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven Bake Element – Part Number: 316075103
$47.95
In Stock
Oven Bake Element
★★★★★
★★★★★
(384)
Part #316075103
The Oven Bake Element is a black, metal part which supplies heat to the oven. This element is 19-1/2" wide x 18-1/2" long and has 3-1/2" inserts. It is rated as "Easy" to install by users, and attaches to the bottom of the oven. If you notice visible damage, or that your oven is not receiving heat properly then it may be a problem with this part. Check your model number and user manual to see if this is the right part for you. It is important for you to disconnect your appliance from the power source before performing this repair. After disconnecting your appliance, remove the two screws/nuts connecting the old element, pull it out, and discard if faulty. Simply connect the new element prongs where the old element fit, and screw it back in. You may need a flashlight when making this repair.
Terminal Block Kit – Part Number: 5303935058
$20.88
In Stock
Terminal Block Kit
★★★★★
★★★★★
(45)
Part #5303935058
This surface burner terminal block kit comes with interchangeable mounting brackets, terminal box, ceramic wire nuts, heat shrink protective tubing and wires.
Drip Bowl - 8" – Part Number: 316048413
$19.75
In Stock
Drip Bowl - 8"
★★★★★
★★★★★
(18)
Part #316048413
This drip bowl is located beneath the element and catches any spills. It is sold individually and has a diameter of approximately 10 inches.
Chrome Drip Bowl - 6" – Part Number: 316048414
$18.65
In Stock
Chrome Drip Bowl - 6"
★★★★★
★★★★★
(20)
Part #316048414
This drip bowl is sold individually. This part is located beneath the element and catches spills from cooking.
Surface Element - 8 Inch - 2600W – Part Number: 316442301
$51.65
In Stock
Surface Element - 8 Inch - 2600W
★★★★★
★★★★★
(23)
Part #316442301
This surface burner element is eight inches in diameter. It has five turns, 2600 watts and looped terminal ends. The element provides heat to the cooking surface on your range. If your element is not heating, you may need to replace this part. Please make sure the power has been disconnected and the element is turned off and had time to cool before starting your repair. The element is a genuine OEM part. It is sold individually.
Rear Drawer Glide – Part Number: 3051163
$11.53
In Stock
Rear Drawer Glide
★★★★★
★★★★★
(10)
Part #3051163
This rear drawer glide is for your bottom range drawer. It is sold individually.
Light Bulb – Part Number: 316538904
$35.95
In Stock
Light Bulb
★★★★★
★★★★★
(9)
Part #316538904
This 40-watt appliance light bulb is a reliable replacement for use in select ranges, refrigerators, freezers, and microwaves. It provides bright, consistent lighting to help you see clearly inside your appliance. Installation is simple—just unscrew the old bulb and replace it with the new one. If the existing bulb is broken, disconnect power and use needle-nose pliers to safely remove the remaining base. Sold individually, this bulb is a commonly replaced part—consider keeping a spare on hand.
Front Drawer Glide – Part Number: 3051162
$9.95
In Stock
Front Drawer Glide
★★★★★
★★★★★
(5)
Part #3051162
This front drawer glide is for your bottom range drawer. Your range has 4 in total. This drawer glide is sold individually.
Main Terminal Block Kit – Part Number: 5304409888
$48.78
In Stock
Main Terminal Block Kit
★★★★★
★★★★★
(11)
Part #5304409888
Terminal blocks (also called terminal boards or strips) provide a convenient means of connecting individual electrical wires.
6-Inch Coil Burner Element – Part Number: 318372211
$43.51
In Stock
6-Inch Coil Burner Element
★★★★★
★★★★★
(10)
Part #318372211
This element has looped terminal ends and comes with a black medallion center. This element is a genuine OEM replacement part, has looped terminal ends, comes with a black medallion center, and fits most electric ranges. All burners are made of a heating wire that produces heat from electricity. Remove the non-functional burner element from the terminal block (or receptacle). Use a multi-meter to check for continuity. Check the end of the terminals for corrosion or heat damage. If there is corrosion or heat damage, replace the whole terminal block or receptacle at the same time you replace the damaged coil. Before you start this repair, make sure that the element is turned off and cool to the touch.
LENS – Part Number: 5304524341
$34.95
In Stock
LENS
★★★★★
★★★★★
(14)
Part #5304524341
This lens covers the interior oven light bulb.
Oven Light Socket – Part Number: 316116400
$75.74
In Stock

Common Symptoms of the 77-4957-45-08

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven woudn't heat
1298 of 1511 people found this instruction helpful.
  • David from Shawnee, KS
  • Really Easy
  • Less than 15 mins
  • Screw drivers
1. Removed two screws, pulled out the element, voltage tested the element and determined it was an open circuit (bad element).
2. Ordered the part from partselect.com
3. Disconnected element, connected the new one, and screwed it back in.
Was this helpful?
Thank you for voting!
Element cracked in two pieces
821 of 928 people found this instruction helpful.
  • Michael from Green Bay, WI
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Shut off circuit breaker to stove and collected the tool from the basement. Turned on flashlight. Unscrewed the two hex nuts from the old element/back of the oven. Slid the old element prongs out of the back, exposing the connecting wires. Pulled the connecting wires off of the old element, carefully, so that the connections wouldn 't come off of the wires. Threw the old element pieces in the garbage. Connected the new element to the connecting wires and re-fastened the hex nuts. My husband had wanted to call the repair man, but it didn't look too difficult, so I decided to try it on my own. Boy was he surprised when I fixed it, and for a fraction of the cost of hiring a repairman! Ladies, we can do this ourselves!!! :) Thank you for being there for us to order our part from, Parts Select, we had our new part in less than 24 hours, so the shipping was blazing fast!!! Keep up the good work!!! :)
Was this helpful?
Thank you for voting!
drawer glides were broke on front and back
576 of 600 people found this instruction helpful.
  • bryan from sparta, WI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
used a screwdriver pushed the old ones out put the new in. the video instructions were great.
Was this helpful?
Thank you for voting!